取消
显示结果 
搜索替代 
您的意思是: 
cancel
6166
查看次数
20
有帮助
1
回复

#分享达人# 3850堆叠的一下注意事项

fortune
VIP Expert VIP Expert
VIP Expert
3850交换机堆叠,如果是首次堆叠,必须要形成菊花链,不能是单条堆叠线路,如果是单线路则报错如下:

设备无法正常开机。

171454u2cbhqa41dllkqbd.png

堆叠形成之后,一根堆叠线路坏了还可以继续正常使用!

堆叠配置:

堆叠重新选择:

An active switch retains its role unless one of these events occurs:

• The switch stack is reset.

• The active switch is removed from the switch stack.

• The active switch is reset or powered off.

• The active switch fails.

• The switch stack membership is increased by adding powered-on standalone switches or switch stacks.

The active switch is elected or reelected based on one of these factors and in the order listed:

1 The switch that is currently the active switch. (已经是Master)

2 The switch with the highest stack member priority value. (高优先级)

3 The switch with the shortest start-up time. (先启动)

4 The switch that has the configuration file.(有配置文件)

5 The switch with the lowest MAC address.(低MAC地址)

Default Switch Stack Configuration

171556ymtamya4e8wikkth.png

switch 3 renumber 4

reload slot 4

switch 3 priority 2 (The priority value range is 1 to 15. )

The new priority value helps determine which stack member is elected as the new active switch when the current active switch or switch stack resets

show switch

新设备加入前可以修改好设备number

Switch(config)# switch 3 provision WS-xxxx // 1 - 9

通过 no switch 3 provision 删除配置

禁用堆叠端口:

switch 2 stack port 1 disable

switch 2 stack port 1 enable



1 条回复1

tony_tan
Beginner
Beginner
感谢分享,:)
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:





认可您的同行
快捷链接