生成树问题，日志总是有这个错误！

[nmyp007]

%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0/49 on VLAN0001. Port consistency restored
%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0/49 on VLAN0111. Port consistency restored
%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0/49 on VLAN0100. Port consistency restored.
%SPANTREE-2-BLOCK_PVID_PEER: Blocking GigabitEthernet0/49 on VLAN0111. Inconsistent peer vlan
%SPANTREE-2-BLOCK_PVID_LOCAL: Blocking GigabitEthernet0/49 on VLAN0001. Inconsistent local vlan
%SPANTREE-2-BLOCK_PVID_PEER: Blocking GigabitEthernet0/49 on VLAN0100. Inconsistent peer vlan.
%SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 100 on GigabitEthernet0/49 VLAN1.
0/49口是trunk口，对端和本端的本征native都是vlan1，需要怎么配置才不报这个错误，谢谢各位大神

[nmyp007]

CSCO12178277 发表于 2018-6-5 16:32
如果端口TRUNK封装没有问题，sh vlan看一下两边的本征VLAN是否一致，本地VLAN是否一致。有可能是另一边缺 ...

2960是接入的设备，只是在刚启动时，报这个错误，运行中没有发现这个！

[nmyp007]

kaiji 发表于 2018-5-23 16:18
本台设备添加个vlan 100试试

都有vlan100，这个是设备互联vlan