请教 2台C3850 堆叠 升级ios问题?

[D_W]

BUNDLE 模式,已抄IOS文件到2台3850 flash,

1, 是否要將旧起动文件去掉3850_2F_Core(config)# no boot system switch all flash:/cat3k_caa-universalk9.16.03.06.SPA.bin

    加上新的起动文件就可以3850_2F_Core(config)# boot system switch all flash:/cat3k_caa-universalk9.16.12.07.SPA.bin 

2, 已抄IOS文件到2台3850 flash,但空間是0, 不知道能否升級成功?

    1624104960 bytes total (0 bytes free)

3850_2F_Core#dir flash:
Directory of flash:/

77602 -rw- 2097152 May 5 2022 09:31:39 +00:00 nvram_config
77603 -rw- 15954556 Jan 15 2018 15:23:53 +00:00 cat3k_caa-guestshell.16.03.05b.SPA.pkg
77604 -rw- 22301472 Jan 15 2018 15:23:51 +00:00 cat3k_caa-rpbase.16.03.05b.SPA.pkg
77605 -rw- 266035828 Jan 15 2018 15:23:53 +00:00 cat3k_caa-rpcore.16.03.05b.SPA.pkg
15521 -rw- 9089660 Jan 15 2018 15:23:52 +00:00 cat3k_caa-srdriver.16.03.05b.SPA.pkg
15522 -rw- 212812400 Jan 15 2018 15:23:52 +00:00 cat3k_caa-wcm.16.03.05b.SPA.pkg
31041 -rw- 13423224 Jan 15 2018 15:23:52 +00:00 cat3k_caa-webui.16.03.05b.SPA.pkg
31042 -rw- 4748 Jan 15 2018 15:24:16 +00:00 packages.conf
31043 -rw- 1295 Oct 24 2020 08:41:44 +00:00 bootloader_evt_handle.log
11 drwx 4096 Jan 15 2018 15:34:24 +00:00 core
7762 drwx 4096 Jan 15 2018 15:26:58 +00:00 .prst_sync
38801 drwx 4096 Jan 15 2018 15:27:00 +00:00 .rollback_timer
46561 drwx 4096 Oct 24 2020 08:41:57 +00:00 dc_profile_dir
46563 drwx 4096 Jan 15 2018 15:27:08 +00:00 gs_script
31045 -rw- 65301 Oct 24 2020 08:42:15 +00:00 memleak.tcl
31046 drwx 4096 Sep 21 2020 05:21:20 +00:00 .installer
31047 -rw- 2097152 May 5 2022 09:31:40 +00:00 nvram_config_bkup
31048 -rw- 35 Sep 24 2020 03:10:53 +00:00 pnp-tech-time
31049 -rw- 53044 Sep 24 2020 03:10:59 +00:00 pnp-tech-discovery-summary
13 drwx 4096 Sep 21 2020 05:08:04 +00:00 tech_support
32 drwx 4096 Sep 21 2020 05:23:05 +00:00 .dbpersist
31052 -rw- 0 Sep 21 2020 05:23:14 +00:00 rdope_out.txt
31053 -rw- 68 Sep 21 2020 05:23:26 +00:00 rdope.log
33 drwx 4096 Sep 21 2020 05:23:33 +00:00 onep
31054 -rw- 537577577 Oct 16 2020 09:16:08 +00:00 cat3k_caa-universalk9.16.03.06.SPA.bin
31055 -rw- 1336 May 6 2022 08:30:06 +00:00 vlan.dat
31056 -rw- 480189009 May 5 2022 08:49:06 +00:00 cat3k_caa-universalk9.16.12.07.SPA.bin

1624104960 bytes total (0 bytes free)
3850_2F_Core#sh boot
---------------------------
Switch 1
---------------------------
Current Boot Variables:
BOOT variable = flash:/cat3k_caa-universalk9.16.03.06.SPA.bin;flash:/cat3k_caa-universalk9.16.12.07.SPA.bin;

Boot Variables on next reload:
BOOT variable = flash:/cat3k_caa-universalk9.16.03.06.SPA.bin;flash:/cat3k_caa-universalk9.16.12.07.SPA.bin;
Manual Boot = no
Enable Break = no
Boot Mode= DEVICE
iPXE Timeout= 0
3850_2F_Core#

[D_W]

好的,非常感謝你的帮助, 请教思科交换机怎样设置 用戶权限和管理員权限 ?

用Telnet 进入交換机

1,普通用戶权限进入 只能查看交换机配置,不能修改和保存配置

2,管理員权限 全部都可以.

[ilay]

参考这个吧，之前曾经回复过一个类似的设置privilege的问题，可惜找不到了

https://community.cisco.com/t5/%E4%BA%A4%E6%8D%A2%E6%8A%80%E6%9C%AF/%E6%8E%A5%E5%85%A5%E5%B1%82%E4%BA%A4%E6%8D%A2%E6%9C%BA-2960%E4%B8%8E3560-%E7%9A%84%E6%9D%83%E9%99%90%E9%85%8D%E7%BD%AE%E9%97%AE%E9%A2%98/td-p/4332919

[D_W]

升級2台3850 堆叠 Bundle Mode 模式,用以下命令出現問題

2F_Core#request platform software pack install switch all file flash:cat3k_caa-universalk9.16.12.07.SPA.bin retain-source-file new verbose
--- Starting install local lock acquisition on switch 1 ---
Finished install local lock acquisition on switch 1

FAILED: switch local is not booted with provisioning file
Ensuring that cached content is written to media

[ilay]

把完整的升级步骤发出来，然后show flash-1:, show flash-2:

[D_W]

我另一組3850的 Install Mode 用以下命令可以成功升級

#request platform software package install switch all file flash:cat3k_caa-universalk9.16.12.07.SPA.bin new auto-copy 

Bundle Mode 模式

我用回之前的方法可以, 如Bundle mode 轉 Install mode 可能要用命令改变才可以用以上的方法,不管怎样还是謝謝你的回复.

boot system switch all flash:/cat3k_caa-universalk9.16.12.07.SPA.bin