取消
显示结果 
搜索替代 
您的意思是: 
cancel
19909
查看次数
74
有帮助
11
回复

WS-C4506-E 引擎不同不能做链路聚合、vss、堆叠?

nmyp007
Level 7
Level 7
main和slave两个设备的信息如下,请大神们看看(想万兆端口做):
1、HY-SW4506E-Slave#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.03.SG RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Mon 09-Jan-12 03:25 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A17B4, data-base: 0x13CCB460
ROM: 15.0(1r)SG5
Jawa Revision 7, Snowtrooper Revision 0x0.0x116
HY-SW4506E-Slave uptime is 17 hours, 29 minutes
System returned to ROM by power-on
Running default software
License Information for 'WS-X45-SUP7-E'
License Level: lanbase Type: Default. No valid license found.
Next reboot license Level: lanbase
cisco WS-C4506-E (MPC8572) processor (revision 11) with 2097152K/20480K bytes of memory.
Processor board ID SPE2101005M
MPC8572 CPU at 1.5GHz, Supervisor 7
Last reset from PowerUp
82 Virtual Ethernet interfaces
72 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
2、HY-SW4506E-Main#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-LANBASE-M), Version 15.0(2)SG5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 31-Jul-12 04:12 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x128C6878
ROM: 12.2(44r)SG10
Darkside Revision 4, Nexu Revision 14, Fortooine Revision 1.32
HY-SW4506E-Main uptime is 1 week, 6 days, 16 hours, 29 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-lanbase-mz.150-2.SG5.bin"
cisco WS-C4506-E (MPC8548) processor (revision 13) with 524288K bytes of memory.
Processor board ID FXS1707Q05G
MPC8548 CPU at 1GHz, Supervisor 6L-E
Last reset from PowerUp
42 Virtual Ethernet interfaces
88 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
1 个已接受解答

已接受的解答

jingjian
Spotlight
Spotlight
本帖最后由 arvinjing 于 2017-12-4 17:28 编辑
nmyp007 发表于 2017-12-4 14:00
那链路聚合10G可以做吗?

链路聚合没问题,你的两台设备都是可以支持的另外,需要注意的是SUP7的万兆接口类型为SFP+,光纤接口为LC接口
SUP6L的万兆接口类型为X2,光纤接口为SC接口,
因此你的光纤跳线的接口类型为SC-LC
在配置过程中遇到什么问题了吗?

在原帖中查看解决方案

11 条回复11

jingjian
Spotlight
Spotlight
本帖最后由 arvinjing 于 2017-12-4 17:28 编辑
nmyp007 发表于 2017-12-4 14:00
那链路聚合10G可以做吗?

链路聚合没问题,你的两台设备都是可以支持的另外,需要注意的是SUP7的万兆接口类型为SFP+,光纤接口为LC接口
SUP6L的万兆接口类型为X2,光纤接口为SC接口,
因此你的光纤跳线的接口类型为SC-LC
在配置过程中遇到什么问题了吗?

cruiseluo
Spotlight
Spotlight
4506-E 好像版本同不同都不能做vss,因此链路聚合只能在单台交换机内部做而不能跨交换机,堆叠好像也不支持

jingjian
Spotlight
Spotlight
本帖最后由 arvinjing 于 2017-12-4 11:38 编辑
1,在硬件支持上看,只有SUP7,SUP7L以上的引擎才能够支持VSS,你的main交换机为SUP6L的引擎,所以不支持VSS2,从软件支持上看,只有XE 3.4.0SG 以后的版本才可以支持VSS,你的软件也不满组需求
3,下面是关于4500平台的VSS FAQ,你的疑问基本都可以在这里找到答案
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/q-and-a-c67-734489.html
基于你的这种情况,建议部署HSRP比较好

fortune
VIP Alumni
VIP Alumni
4500-E switches configured with Supervisor Engines 7-E, 7-LE, or 8E support Quad-Supervisor VSS Mode. 确实,你的6LE 引擎是不支持VSS 的哦

zhangjialei
Level 1
Level 1
没办法做,你一台4500-E 是Supervisor 6L-E ,一台是Supervisor 7。7E的话是可以做vss的,但是6-E的没有办法支持,建议买一个新的7-E engine 进去,做VSS,如果想维持现状不变的话可以考虑做HSRP(Hot Standby Router Protocol )。

duxiulei
Level 1
Level 1
你的SUP7那台许可是LAN BASE 就算两台换成一样的引擎 许可也不满足 至少IP base许可

XuLei18879
Level 1
Level 1
arvinjing 发表于 2017-12-4 09:49
1,在硬件支持上看,只有SUP7,SUP7L以上的引擎才能够支持VSS,你的main交换机为SUP6L的引擎,所以不支持VSS2 ...

再改一下生成树的根,实现双active就行了

nmyp007
Level 7
Level 7
arvinjing 发表于 2017-12-4 09:49
1,在硬件支持上看,只有SUP7,SUP7L以上的引擎才能够支持VSS,你的main交换机为SUP6L的引擎,所以不支持VSS2 ...

那链路聚合10G可以做吗?

nmyp007
Level 7
Level 7
arvinjing 发表于 2017-12-4 14:16
链路聚合没问题,你的两台设备都是可以支持的另外,需要注意的是SUP7的万兆接口类型为SFP+,光纤接口为LC ...

谢谢!正准备哪天晚上整改的!X2的SC只有买SC的模块了吧?!

epli
Level 1
Level 1
Supervisor 6L-E 引擎明确不支持VSS的

xuxianda7
Spotlight
Spotlight
引擎都不一样哦,VSS 必须要一样的引擎 ,SUP6 是不支持的 7LE 开始支持
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:









快捷链接