大佬们好，我这里有两个设备直连。SW1接口地址为12.1.1.1，SW2接口地址为12.1.1.2，我在SW1起了一个L0接口地址111.111.111.111。我在SW2 使用命令sh cdp nei de查看详细的邻居信息，显示如下
Switch#sh cdp nei detail
-------------------------
Device ID: Switch
Entry address(es):
IP address: 12.1.1.1
Platform: Cisco , Capabilities: Router Switch IGMP
Interface: GigabitEthernet0/0, Port ID (outgoing port): GigabitEthernet0/0
Holdtime : 168 sec
Version :
Cisco IOS Software, vios_l2 Software (vios_l2-ADVENTERPRISEK9-M), Version 15.2(CML_NIGHTLY_20190423)FLO_DSGS7, EARLY DEPLOYMENT DEVELOPMENT BUILD, synced to V152_6_0_81_E
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 23-Apr-19 04:48 by mmen
advertisement version: 2
VTP Management Domain: ''
Duplex: full
Management address(es):
IP address: 12.1.1.1
Total cdp entries displayed : 1
Switch#
---------------------------------------------
但是我希望他IP地址是111.111.111.111，这个可以做到吗？
