Error Message C4K_LINECARD-3-INTERRUPTTIMEOUTRUNTIME: Module [dec] interrupt([dec])
completion timed out which may affect port functionality. Please reset the module
to recover full functionality.
Explanation The software took too long to handle an interrupt from the module hardware. This may affect applying port configuration changes to the hardware.
Recommended Action Reset the linecard. If it does not recover, contact Cisco support.
信息来源:
Catalyst 4500 Series Switch Cisco IOS System Message Guide, Cisco IOS Release XE 3.1.0SG
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/01xo/system/message/xe_310sg_sems/emsg.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !