我上联cisco 交换机配置了dot1x,接口配置如下:
当我把华三交换机当做hub,接在此接口下,我终端连华三交换机可以正常认证通过,并获取地址;
问题:当我把Cisco 2960交换机当做hub,接在此接口下,我终端连2960接口无法认证,在终端抓包发现没有认证报文
有哪位大神遇到过此现象的?
interface GigabitEthernet1/0/39
switchport access vlan 30
switchport mode access
load-interval 30
authentication host-mode multi-auth
authentication port-control auto
authentication periodic
authentication violation protect
dot1x pae authenticator
spanning-tree portfast disable
end