FAN PS-1 is NOT INITIALIZED

[wanghaitao]

Dear all,

I through the show env all this command, got it：

FAN 1 is OK
FAN 2 is OK
FAN PS-1 is NOT INITIALIZED
FAN PS-2 is OK
TEMPERATURE is OK
Temperature Value: 21 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 46 Degree Celsius
Red Threshold : 60 Degree Celsius

Then, please tell me what does this mean the results?
Thx

[Luke Huang · Accepted solution]

更换PWR module应该可以解决，FAN module本身没有问题。更详细信息建议开TAC case咨询

[blgao]

什么平台，先查看一下电源模块是否ok

[wanghaitao]

3750X 堆叠sw2
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1A No Input Power Bad N/A 235/0
1B C3KX-PWR-350WAC LIT15380T7T OK Good Good 350/0
2A No Input Power Bad N/A 235/0
2B C3KX-PWR-350WAC LIT15380SZE OK Good Good 350/0
SW Status RPS Name RPS Serial# RPS Port#
-- ------------- ---------------- ----------- ---------
1 Not Present <>
2 Not Present <>

[wanghaitao]

wanghaitao 发表于 2015-1-23 17:03
3750X 堆叠sw2
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- --- ...

Dear all,
结合上面的信息，我们可以知道电源模块是正常的。可是的 PS-1 风扇出现了未初始化，这种情况该怎么解释和排除故障的呢？更换风扇吗？是否能给我一个建议。谢谢
Regards,
Wang

[Yanli Sun]

您好，不知您的问题是否已经得到满意答复，如果是请您选择“已解决”，感谢您的支持~~~