取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

1042
查看次数
10
有帮助
2
回复
lifenglu50789
Beginner

话机8861如何手工从3PCC刷成SIP版本?

目前有一台8861,目前版本是3PCC的10.0的版本,请问如何手工从TFTP刷机到SIP版本呢?
似乎和以前7975方法不同的
求助!感谢!
2 条回复2
fayawang
Cisco Employee

本帖最后由 fayawang 于 2020-3-30 12:48 编辑
我找到的一个关于upgrade的介绍是英文版的希望对你有帮助。但我没有实际测试过。
Firstly, let’s read the user’s question: “I might have missed something in the documentation but I spent a lot of time trying to upgrade my 3PCC phones to Enterprise.
This is why I wanted to share it with you in a simple task list:
1. download from CCO a 8800 firmware. .zip format, not .cop.sgn.
2. unzip the files and share it with a TFTP server. I used a third party TFTP server and the CUCM too, both works.
3. connect to the phone using the following URL: http:///admin/advanced
4. click on Voice tab and Provisioning.
5. in Upgrade Rule field, put tftp:////.loads (exemple: tftp://1.1.1.1/sip88xx.10-3-1-20.loads)
6. for Enable Enterprise Image Upgrade, select Yes.
7. check if the Firmware upgrade is at it's default value (Yes) and click on Submit All Changes.
Yanli Sun
Community Manager

感谢专家解答
创建
认可您的同行
Content for Community-Ad