取消
显示结果 
搜索替代 
您的意思是: 
cancel
4043
查看次数
12
有帮助
3
回复

ASA5515X 系统恢复问题 急@!!!

liang550
Beginner
Beginner
我用TFTP在ROMMON系统里面导入了ISO。然后copy tftp FLASH 了。也设置boot system flash 了。寄存值夜是0X2102。
但是重启系统就还是进入了rommon系统。
1 个已接受解答

已接受的解答

qiangzh2
Cisco Employee
Cisco Employee
请参照一下步楱操作:
Rommon #9> interface giga0/0 {choose the interface where the TFTP server
will be located at}
GigabitEthernet0/0
Link is UP
MAC Address: 0018.1900.29ec
Rommon #10> address 10.198.28.5 {interface IP address}
Rommon #11> server 10.198.28.28 {TFTP server IP address}
Rommon #12> file asa803-k8.bin
Rommon #13> tftp
ROMMON Variable Settings:
ADDRESS=10.198.28.5
SERVER=10.198.28.28
GATEWAY=0.0.0.0
PORT=GigabitEthernet0/0
VLAN=untagged
IMAGE=asa803-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
Tftp asa803-k8.bin@10.198.28.28
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ASA此时会自动重启.
Then you need to copy the image to flash:
ASA5510#copy tftp disk0:
Enter the remote host IP address where you have the TFTP server loaded at.
Enter the ASA binary filename: asa803-k8.bin.
Type yes.
-Issue the following command to set "asa803-k8.bin" as the boot image.
ASA5510(config)# boot system disk0:/asa803-k8.bin
ASA5510# write memory
-Reload.

在原帖中查看解决方案

3 条回复3

qiangzh2
Cisco Employee
Cisco Employee
请参照一下步楱操作:
Rommon #9> interface giga0/0 {choose the interface where the TFTP server
will be located at}
GigabitEthernet0/0
Link is UP
MAC Address: 0018.1900.29ec
Rommon #10> address 10.198.28.5 {interface IP address}
Rommon #11> server 10.198.28.28 {TFTP server IP address}
Rommon #12> file asa803-k8.bin
Rommon #13> tftp
ROMMON Variable Settings:
ADDRESS=10.198.28.5
SERVER=10.198.28.28
GATEWAY=0.0.0.0
PORT=GigabitEthernet0/0
VLAN=untagged
IMAGE=asa803-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
Tftp asa803-k8.bin@10.198.28.28
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ASA此时会自动重启.
Then you need to copy the image to flash:
ASA5510#copy tftp disk0:
Enter the remote host IP address where you have the TFTP server loaded at.
Enter the ASA binary filename: asa803-k8.bin.
Type yes.
-Issue the following command to set "asa803-k8.bin" as the boot image.
ASA5510(config)# boot system disk0:/asa803-k8.bin
ASA5510# write memory
-Reload.

xilu2
Beginner
Beginner
你最终的目的是要恢复系统吗?还是只要能进入Rommon系统?

Yanli Sun
Community Manager
Community Manager
您好,不知您的问题是否已经得到满意答复,如果是请您选择“已解决”,感谢您的支持~~~
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:





认可您的同行
快捷链接