安全讨论区

与安全技术专家互动,发布问题寻求帮助
取消
显示结果 
搜索替代 
您的意思是: 
cancel

December 2020

December 2020

论坛帖子

Anyconnect在安装时出现以下报错信息,无法进行安装。There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.请问有什么解决方法吗?

113808eg8a1ivdpi3tijzg.jpg
972741861xb 发布者 Level 1
  • 22379 查看次数
  • 8 回复
  • 0 有帮助

In the Cisco AnyConnect 4.10, Cisco AnyConnect NAM Wireless management module in windows system, connecting to public wifi will pop up through AnyConnect Browser。What methods can be closed? Can it be closed via windows cmd。 Thanks

starboys_83 发布者 Level 1
  • 673 查看次数
  • 0 回复
  • 0 有帮助

楼主今年准备到美国读研,学校提供了anyconnect的使用,但是因为我手贱把原来在C盘的源文件夹移动了导致整个程序不可用,想重新安装却总是提示已经存在一个客户端在系统里,所以求助!该怎么做呀!好人一生平安!!!!附上截图注:是windows10客户端

holywong 发布者 Level 1
  • 29523 查看次数
  • 13 回复
  • 0 有帮助

我在做IPsec的时候发现cisco的防火墙是出站的时候是可以先执行nat后匹配出站ACL的,入站的时候是先匹配入站ACL后执行nat转换,我想了解一下这个匹配顺序是否跟版本有关系,思科的官网资料有没有介绍这一点的

3082556694 发布者 Level 1
  • 1640 查看次数
  • 1 回复
  • 0 有帮助

配置校园网时两个校区的两个校区的出口路由器上配置隧道也配置NET后,隧道就不能用了,这个怎么解决啊?

1933059772 发布者 Level 1
  • 1107 查看次数
  • 1 回复
  • 0 有帮助

使用Cisco anyconnect secure Mobility client 链接单位的服务器,现在频繁掉线。所有电脑和客户端都出现。提示错误信息为:The secure gateway has rejected the connection attempt. A new connection attempt to the same or another secure gateway is needed, which requires re-autoentication. 公司更换联通千兆...

lee_fairy 发布者 Level 1
  • 1421 查看次数
  • 2 回复
  • 0 有帮助

中心ASA5510固定公网IP    分支ASA5505 PPPOE,做Site to Site IPSec 中心已连接其它多个站点目前正常工作,有一个分支 ASA5505 连中心 VPN Tunnel不通,ciscoasa5505# show crypto isakmp saActive SA: 1Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 11 IKE Peer: X...

已解决! ASA与AD联动

各位大大,最近做ASA anyconnect vpn 与ldap认证联动,认证是成功了,但是发现限制用户是ldap-base-dn,我是想实现认证只能使用AD里面具体VPN 组里面的用户,而不是所有AD用户都可以登录。请教各位懂得指点迷津!

renan_mao 发布者 Level 1
  • 1685 查看次数
  • 3 回复
  • 0 有帮助

我遇到两个问题1、多个SP是否能与同一个ISAKMP-SA(phase 1)绑定?如果可以,这些SP有什么共同点?通常来说,绑定关系是 一个SP对一个ISAKMP 还是 多个SP对一个ISAKMP?2、使用同一个 phase 1 协商多个 phase 2 的条件是什么?

2236629741 发布者 Level 1
  • 1012 查看次数
  • 1 回复
  • 0 有帮助

Hello,I had setup the sslvpn in the cisco router below, but I could not connect with the inside network by the anyconnect software.can you help me to check it. Building configuration...Current configuration : 3657 bytes!! Last configuration change at...

Robin Fan 发布者 Level 1
  • 2327 查看次数
  • 2 回复
  • 0 有帮助

Mac OS Monterey 版本12.0.1Cisco anyconnect版本anyconnect-macos-4.8.00175-predeploy-k9.dmg在家办公,公司必须要Cisco连内网。设置好后连接时提示“AnyConnect was not able to establish a connection to the specified secure gateway. Please try connecting again.”系统重装、anyconnect重装都试过了请大佬...

charley2021 发布者 Level 1
  • 3318 查看次数
  • 1 回复
  • 0 有帮助

本帖最后由 wuli-raba 于 2020-3-20 16:09 编辑 思科模拟器中两个ASA 5506,9.6版本做IPSec VPN,已经成功实现VPN了。去吃了个饭,关了Cisco Packet Tracer,然后回来重新打开模拟器,发现VPN不通了。在ASA上show crypto is sa发现两个都是MM_NO_STATE状态,我该怎么解决呢?模拟器版本7.3.0,ASA是5506,版本9.6(1),目前我都没有找到可以调试VPN信息的命令,,没有debug包信息:The int...

wuli-raba 发布者 Level 1
  • 5882 查看次数
  • 8 回复
  • 0 有帮助