取消
显示结果 
搜索替代 
您的意思是: 
cancel
4593
查看次数
0
有帮助
1
回复

ucs service profiles config Failure

kli0615
Level 1
Level 1
本帖最后由 kli0615 于 2015-11-24 17:22 编辑
创建service profiles 关联配置失败,什么问题导致?
154910a55gi6tk56kyzddd.png
Server 报错,这个codefsmFailComputeBladeDiscover
Fault Code:F999560
Message
[FSM:FAILED]: sam:dme:ComputeBladeDiscover
Explanation
None set.
Recommended Action
Unless an FSM fault appears on the Faults tab, you do not need to take any action to resolve the fault. FSM stages fail and retry for many reasons. These faults do not always indicate an issue with a component or the FSM.
Fault Details
Severity: critical
Cause: fsm-failed
CallHome: none
mibFaultCode: 999560
mibFaultName: fsmFailComputeBladeDiscover
moClass: compute:Blade
Type: fsm
1 个已接受解答

已接受的解答

yingnxu
Cisco Employee
Cisco Employee
可以先尝试以下操作:
-First disassociate the blade from the Service Profile
-Then disassociate the template from the Service Profile
-Decommission the server
-Re-acknowledge the blade
-Associate the blade to the SP(server profiles)
-Associate the template to the SP
如果以上操作还是不能解决
请问这个server发现的过程停在哪个界面,是到21%吗?如果是的话这有可能是bug,请联系TAC开case处理。

在原帖中查看解决方案

1 条回复1

yingnxu
Cisco Employee
Cisco Employee
可以先尝试以下操作:
-First disassociate the blade from the Service Profile
-Then disassociate the template from the Service Profile
-Decommission the server
-Re-acknowledge the blade
-Associate the blade to the SP(server profiles)
-Associate the template to the SP
如果以上操作还是不能解决
请问这个server发现的过程停在哪个界面,是到21%吗?如果是的话这有可能是bug,请联系TAC开case处理。
快捷链接