取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

4080
查看次数
0
有帮助
4
回复
Highlighted
Beginner

UCS创建storage connect policies时sist 和simt要选择,这两者有何区别

如图所示,在指定目标WWPN后,有simt和sist需要选择,这两者有什么区别呢?
1 个已接受解答

已接受的解答
Highlighted
Cisco Employee

None—Cisco UCS Manager does not configure Fibre Channel zoning.
Single Initiator Single Target—Cisco UCS Manager automatically creates one zone for each vHBA and storage port pair. Each zone has two members. We recommend that you configure this type of zoning unless you expect the number of zones to exceed the maximum supported.
Single Initiator Multiple Targets—Cisco UCS Manager automatically creates one zone for each vHBA. We recommend that you configure this type of zoning if you expect the number of zones to reach or exceed the maximum supported.

在原帖中查看解决方案

4 条回复4
Highlighted
Community Manager

帮顶
Highlighted
Cisco Employee

None—Cisco UCS Manager does not configure Fibre Channel zoning.
Single Initiator Single Target—Cisco UCS Manager automatically creates one zone for each vHBA and storage port pair. Each zone has two members. We recommend that you configure this type of zoning unless you expect the number of zones to exceed the maximum supported.
Single Initiator Multiple Targets—Cisco UCS Manager automatically creates one zone for each vHBA. We recommend that you configure this type of zoning if you expect the number of zones to reach or exceed the maximum supported.

在原帖中查看解决方案

Highlighted
Community Manager

yingnxu_cisco 发表于 2016-2-19 13:02 back.gif
None—Cisco UCS Manager does not configure Fibre Channel zoning.
Single Initiator Single Target— ...

感谢分享
Highlighted
Beginner

也是支持,我代表大家顶你了
不能显示该小部件。