调试无线总会遇到一些故障，比如AP 无法上线的情况，这里有些是配置问题，有些就是兼容性问题了，那么现在常用版本的WLC 与AP 软硬件兼容与否怎么查看呢？ 我这里罗列一下最近常用的版本兼容性，有需要的查询一下，少一些因为兼容性问题导致的故障处理时间：
WLC 8.4.100.0 AP 15.3(3)JE 支持的AP:
Lightweight APs: 1600, 1700, 1810 OEAP, 1810W, 1815i, 1815w, 1830, 1850, 2600, 2700,2800, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 3800, 700, 700W,AP802, AP803, ASA5506W-AP702
Outdoor and Industrial APs: 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1560, 1570, and IW3700
Note The Cisco Aironet 1550 Series APs with 64-MB memory are not supported.
Modules: AIR-RM3010L-x-K9 and AIR-RM3000M
WLC 8.3.133.0 AP 15.3(3)JD11 支持的AP:
Lightweight APs: 1040, 1140, 1260, 1600, 1700, 1810 OEAP, 1810W, 1815i, 1830, 1850,2600, 2700, 2800, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 3800, 600
OEAP, 700, 700W, AP802, AP803, ASA5506W-AP702
Outdoor and Industrial APs: 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU,1552S, 1560, 1570, and IW3700
Modules: AIR-RM3010L-x-K9 and AIR-RM3000M
The Cisco 1040 Series, 1140 Series, and 1260 Series access points have feature parity with
Cisco Wireless Release 8.0. Features introduced in Cisco Wireless Release 8.1 or later are notsupported on these access points.
WLC 8.0.133.0 AP 115.3(3)JA8 支持的AP:
Lightweight APs: 1040, 1130, 1140, 1240, 1250, 1260, 1600, 1700, 2600, 2700, 3500e, 3500i, 3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 600 OEAP, 700, 700W, AP801, and AP802
Outdoor and Industrial APs: 1522, 1524PS, 1524SB, 1532E, 1532I, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1570, and IW3702
WLC 7.6.130.0 AP 15.2(4)JB6 支持的AP:
Lightweight APs: 1040, 1130, 1140, 1240, 1250, 1260, 1600, 2600, 2700, 3500e, 3500i,3500p, 3600e, 3600i, 3600p, 3702e, 3702i, 3702p, 600 OEAP, 700, 700W, AP801, and AP802
Outdoor and Industrial APs: 1522, 1524PS, 1524SB, 1532E, 1532I, 1552E, 1552H, 1552I,1552C, 1552EU, 1552CU, and 1552S
