如果是LAP都注册到作为无线控制器的ME AP上的话,看看是否可以配置AP Group(AireOS WLC是支持的)。每一个楼层属于一个AP Group,选择该Group的AP只放对应的SSID即可。
如下是一个示例,您看是否可行:
Create AP Groups and add 1815W to AP GroupTo create AP Groups and add 1815W to AP Group, follow the procedure below:
ProcedureStep 1
Navigate to
Wireless Settings > Access Point Groups and click on
Add new group button.
Step 2
Under the
General tab, enter the
AP Group Name, description.
Step 3
Under the
WLANs tab, click on the Add new WLAN/RLAN button and select the RLAN to be added to the AP Group.
Step 4
Under the
Access Points tab, select the Wall Plate APs to be added to this AP Group.
Step 5
Under the
Ports Tab, enable the required LAN ports, and select the RLAN for the port.
Step 6
Click
Apply.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !