取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

December 2020

313
查看次数
0
有帮助
3
回复
qinggechen81373
Beginner

思科控制器sp口在console配置可以访问web

思科控制器sp口在console配置可以访问web吗,用什么命令可以恢复默认设置
1 个已接受解答

已接受的解答
Rps-Cheers
Rising star

思科WLC的Service Port就类似于交换机的带外管理口,可以配置用来CLI和WEBUI管理WLC。
主要就是IP地址的配置,如果恢复默认的,就不配置IP地址就好了。

在原帖中查看解决方案

3 条回复3
Rps-Cheers
Rising star

思科WLC的Service Port就类似于交换机的带外管理口,可以配置用来CLI和WEBUI管理WLC。
主要就是IP地址的配置,如果恢复默认的,就不配置IP地址就好了。

在原帖中查看解决方案

qinggechen81373
Beginner

(Cisco Controller) >show interface detailed service-port
Interface Name................................... service-port
MAC Address...................................... 30:e4:db:1b:32:81
IP Address....................................... 0.0.0.0
DHCP Option 82................................... Disabled
DHCP Protocol.................................... Disabled
AP Manager....................................... No
Guest Interface.................................. No
这个端口怎么配置IP呢,用什么命令
Rps-Cheers
Rising star

qinggechen81373 发表于 2021-4-7 11:48
(Cisco Controller) >show interface detailed service-port
Interface Name......................... ...

Step 1
To view the current service-port interface settings, enter this command:
show interface detailed service-port
Note
The service-port interface uses the controller’s factory-set service-port MAC address.
Step 2
Enter these commands to define the service-port interface:
To configure the DHCP server, enter this command:
config interface dhcp service-port enable
To disable the DHCP server, enter this command:
config interface dhcp service-port disable
To configure the IPv4 address, enter this command:
config interface address service-port ip-addr ip-netmask
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_011110.html#ID552
Content for Community-Ad


不能显示该小部件。