Wi-Fi Direct 是 WiFi client 直连 模式
Wi-Fi Direct Clients Policy
Drop-down list from which you can choose a Wi-Fi Direct Clients Policy for a WLAN.
Devices that are Wi-Fi Direct capable can connect directly to each other quickly and conveniently to do tasks such as printing, synchronization, and sharing of data. Wi-Fi Direct devices may associate with multiple peer-to-peer (P2P) devices and with infrastructure WLANs concurrently. Use the Cisco WLC to configure the Wi-Fi Direct Clients Policy, on a per WLAN basis, where you can allow or disallow the association of Wi-Fi devices with infrastructure WLANs, or disable the Wi-Fi Direct Clients Policy for WLANs.
Note Wi-Fi Direct Clients Policy is applicable to WLANs that have APs in local mode only.
The following options are available:
• Disabled—Disables the Wi-Fi Direct Clients Policy for the WLAN and deauthenticates all Wi-Fi Direct clients
• Allow—Allows Wi-Fi Direct clients to associate with the WLAN
• Not-Allow—Disallows the Wi-Fi Direct clients from associating with the WLAN
• Xconnect-Not-Allow—Enables AP to allow a client with the Wi-Fi Direct option enabled to associate, but the client (if it works according to the Wi-Fi standards) will refrain from setting up a peer-to-peer connection
层二 用户隔离 应该是加 ACL
Layer 2 ACL
List the layer 2 ACL that needs to be applied to the WLAN. ACLs are configured on the Access Control Lists page.