能否在WLC上设置某个SSID只能用5G?

[yujun]

办公室客户端比较多，大家多座的比较拥挤，无线网速比较差，目前想搞2个SSID，一个是兼容5G和2.4G,另外一个只能用5G，如果要配置单独一个ssid只能用5G的话，在WLC上要怎么配置呢？

[HaifengLi]

本帖最后由 haifeli 于 2019-10-30 20:32 编辑

(wireless-vwlc-2) >config wlan disable ?
Enter WLAN Identifier between 1 and 512.
all Configure all WLANs.
foreignAp Third Party Access Points.
(wireless-vwlc-2) >config wlan disable 1
(wireless-vwlc-2) >config wlan radio 1 ?
all Configures the WLAN on all Radio bands.
802.11a-only Configures the WLAN on 802.11a only.
802.11bg Configures the WLAN on 802.11b/g only (802.11b only, if 802.11g is disabled).
802.11g-only Configures the WLAN on 802.11g only.
802.11ag Configures the WLAN on 802.11a and 802.11g only.
(wireless-vwlc-2) >config wlan radio 1 802.11a?
802.11a-only 802.11ag
(wireless-vwlc-2) >config wlan radio 1 802.11a-only
(wireless-vwlc-2) >config wlan enable 1
(wireless-vwlc-2) >save config
Are you sure you want to save? (y/n) y
Configuration Saved!
(wireless-vwlc-2) >

[yujun]

感谢！同样也可以在AP上设置只开放5G吧！

[HaifengLi]

YuJun64206140 发表于 2019-10-31 14:33
感谢！同样也可以在AP上设置只开放5G吧！

Wireless - Access Points - All APs - Radios - 802.11b/g/n - Configure - Admin Status --> Disable

[fortune]

二楼说的非常详细啊，开放5G单独是可以的, 信道调整，功率都是可以调整的

[yujun]

嗯，非常感谢两位！学习了!

[robortlin]

学习了!:(:(:(

[one-time]

YuJun64206140 发表于 2019-10-31 16:33
嗯，非常感谢两位！学习了!

如果楼主问题已解决，记得标注最佳答案哦，也是对热心解答的小伙伴们的认可。最佳答案按钮在回复贴的右下角哦~
:handshake感谢各位专家解答，谢谢！

[JZLI342758]

刚好非常需要这个， 可是我是一个小白，不懂设置这个，楼主方便指导下吗。

[liu_zhimin]

最好是关闭2.4G信道，只启用5G信道