5508-Service-port 问题

[Xin Lei]

今天遇到特别奇怪的问题，两台5508成功做了HA；分别两台WLC Service-Port我设置了172.16.2.1/2 /16位；
使用直连线连到SP上去，配了172段IP；web登陆死活都不行，Ping是能通的；不知道什么原因，，，重新清配置都不行；
请问有谁遇到类此问题，，求解:'(:'(:'(
好郁闷......

[zhaowang]

HA之后web请用management port。
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
When AP SSO is enabled, there is no SNMP/GUI access on the service port for both the WLCs in the HA setup.
Once SSO is enabled, the Standby WLC can be accessed via console connection or via SSH on the
service port and on the redundant management interface

[Xin Lei]

本帖最后由 sunlui820522 于 2014-5-16 11:49 编辑

zhaowang 发表于 2014-5-16 09:33
HA之后web请用management port。
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7 ...

• 我 when SSO is enabled, there is no SNMP/GUI access on the service port for both the WLCs in the HA setup.
  

这个功能有点奇怪了，，，也没这个必要吧....
先谢谢你的文档;

[Xin Lei]

zhaowang 发表于 2014-5-16 09:33
HA之后web请用management port。
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7 ...

SSO启动后，备的GUI和SNMP不能使用我能明白；
但是直连service-port不能登陆哦；不是management port哦~~~;P