取消
显示结果 
搜索替代 
您的意思是: 
cancel
3482
查看次数
0
有帮助
6
回复

AIR-SAP2602I-C-K9 瘦AP 如何关闭 LED灯啊

hbczjzc
Beginner
Beginner
Cisco-AP-2602N#led flash disable 这条命令执行完 ,蓝颜色状态灯 还是常亮啊
6 条回复6

liyanazure
Beginner
Beginner
Cisco_CAP3702i#config t
Cisco_CAP3702i(config)#led display ?
dim Turn LED display dim.
off Turn LED display off.
Cisco_CAP3702i(config)#led display off

瘦ap在控制器上关啊,在ap那里可以关。

suzhouxiaoniu
Advocate
Advocate
SAP这个不是胖AP吗。我记得CAP的外置天线是廋AP吧,不知道是否记错

Rockyw
Advisor
Advisor
在控制器上登陆后,
1、在上方的导航栏选择“Wireless”;
2、在左方的栏目选择“All APs”;
3、选择你希望关闭LED指示灯的AP;
4、选择“advanced”;
5、LED State 打勾,选择“Disabled”;
6、Apply 应用;
7、“Save Configuration”

Rockyw
Advisor
Advisor
config ap led-state
To enable or disable the LED-State for an access point, or to configure the flashing of LEDs, use the config ap led-state command.
config ap led-state { enable | disable} { cisco_ap | all}
config ap led-state flash { seconds | indefinite | disable} { cisco_ap | dual-band}
Syntax Description
enable Enables the access point’s LED state.
disable Disables the access point’s LED state.
cisco_ap Name of a Cisco lightweight access point.
flash Configure the flashing of LEDs for an access point.
seconds Duration that the LEDs have to flash. The range is from 1 to 3600 seconds.
indefinite Configures indefinite flashing of the access point’s LED.
dual-band Configures the LED state for all dual-band access points.

sufee
Beginner
Beginner
112350rvckuiakyepxrvlr.jpg112440a0izm0ncigtc4acs.jpg
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:

快捷链接