取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

December 2020

6128
查看次数
10
有帮助
6
回复
wanghaitao
Beginner

AP注册不上WLC

错误信息为:Regulatory domain check has failed for the AP
1 个已接受解答

已接受的解答
guomizha
Cisco Employee

C1whaitao 发表于 2015-7-7 11:07 back.gif
那问题来了,AP我使用的是AIR-LAP1041N-E-K9,国家代码,使用CN,US(之前使用该国家代码,AP正常注册,故 ...

show capw cli rcb
show capw cli config
show inventory
发来看看

在原帖中查看解决方案

6 条回复6
guomizha
Cisco Employee

C1whaitao 发表于 2015-7-7 11:07 back.gif
那问题来了,AP我使用的是AIR-LAP1041N-E-K9,国家代码,使用CN,US(之前使用该国家代码,AP正常注册,故 ...

show capw cli rcb
show capw cli config
show inventory
发来看看

在原帖中查看解决方案

yanzha4
Rising star

国家代码选择错误,检查 WLC上国家代码配置。明显 wlc和AP不是在一个 domain里面
wanghaitao
Beginner

yanzha4 发表于 2015-7-6 15:40 back.gif
国家代码选择错误,检查 WLC上国家代码配置。明显 wlc和AP不是在一个 domain里面

那问题来了,AP我使用的是AIR-LAP1041N-E-K9,国家代码,使用CN,US(之前使用该国家代码,AP正常注册,故障昨天才出现该问题) 目前AP show ip int br 没看到天线接口,只有一个bvi 口 和以太网口,是不是有Bug出现或其他?
wanghaitao
Beginner

guomizha 发表于 2015-7-7 13:34 back.gif
show capw cli rcb
show capw cli config
show inventory

AP04#show capwap cli rcb
AdminState : ADMIN_ENABLED
SwVer : 7.4.110.0
NumFilledSlots : 0
Name : AP04
Location : default location
MwarName : WLC
MwarMacAddr : 0a41.0078.0000
MwarHwVer : 0.0.0.0
ApMode : FlexConnect
ApSubMode : Not Configured
OperationState : DISCOVERY
CAPWAP Path MTU : 576
LinkAuditing : disabled
AP Rogue Detection Mode : Enabled
AP Tcp Mss Adjust : Disabled
Predownload Status : None
Auto Immune Status : Disabled
RA Guard Status : Disabled
Efficient Upgrade State : Disabled
Efficient Upgrade Role : None
TFTP Server : Disabled
AP04#show capwap client config
configMagicMark 0xF1E2D3C4
chkSumV2 32257
chkSumV1 51193
swVer 7.4.110.0
adminState ADMIN_ENABLED(1)
name AP04
location default location
group name AP
mwarName WLC
mwarIPAddress 10.10.7.120
mwarName
mwarIPAddress 0.0.0.0
mwarName
mwarIPAddress 0.0.0.0
ssh status Disabled
Telnet status Enabled
numOfSlots 2
spamRebootOnAssert 1
spamStatTimer 180
randSeed 0x0
transport SPAM_TRANSPORT_L3(2)
transportCfg SPAM_TRANSPORT_DEFAULT(0)
initialisation SPAM_PRODUCTION_DISCOVERY(1)
ApMode FlexConnect
ApSubMode Not Configured
AP Rogue Detection Mode Enabled
OfficeExtend AP [0] Disabled
OfficeExtend AP JoinMode[0] Standard
Discovery Timer 10 secs
Heart Beat Timer 30 secs
Led State Enabled 1
Primed Interval 0
AP ILP Pre-Standard Switch Support Disabled
AP Power Injector Disabled
Infrastructure MFP validation Disabled
Configured Switch 1 Addr 10.10.0.120
non-occupancy channels:
Ethernet (Duplex/Speed) auto/auto
Slot 0
adminstate ADMIN_DISABLED(2)
radioType Slot is empty
Slot 1
adminstate ADMIN_DISABLED(2)
radioType Slot is empty
AP failure counters: LinkFailure = 9549, SpamReboots = 43760, ApCrashes = 0
AP join priority = 1
AP lsc enable = 0
AP lsc reboot cnt = 0
AP lsc max num of Retry = 0
Mesh AP lsc enable = 0
AP retransmit count = 0
AP retransmit timer = 0
AP vlan tag status = Disabled
SSC Controller Hash validation enabled.
AP04# show inv
NAME: "AP1040", DESCR: "Cisco Aironet 1040 Series (IEEE 802.11n) Access Point"
PID: AIR-LAP1041N-E-K9 , VID: V01, SN: FGL1451S1FJ
AP04#
wanghaitao
Beginner

C1whaitao 发表于 2015-7-7 11:07 back.gif
那问题来了,AP我使用的是AIR-LAP1041N-E-K9,国家代码,使用CN,US(之前使用该国家代码,AP正常注册,故 ...

附上AP的LOG:
*Jul 7 05:28:56.336: Starting Ethernet promiscuous mode
*Jul 7 05:29:14.340: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Jul 7 05:29:24.343: %CAPWAP-3-ERRORLOG: Selected MWAR 'WLC'(index 0).
*Jul 7 05:29:24.343: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jul 7 05:29:25.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.0.120 peer_port: 5246
*Jul 7 05:29:25.980: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.0.120 peer_port: 5246
*Jul 7 05:29:25.981: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.0.120
*Jul 7 05:29:26.001: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jul 7 05:29:26.002: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jul 7 05:29:26.002: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jul 7 05:29:26.002: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.10.0.120
*Jul 7 05:29:26.157: Starting Ethernet promiscuous mode
*Jul 7 05:29:44.229: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
., 1)
*Jul 7 05:29:44.229: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jul 7 05:29:44.229: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.0.120:5246
*Jul 7 05:29:44.298: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jul 7 05:29:44.299: bsnInitRcbSlot: slot 0 has NO radio
*Jul 7 05:29:44.299: bsnInitRcbSlot: slot 1 has NO radio
*Jul 7 05:29:44.320: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1
guomizha
Cisco Employee

C1whaitao 发表于 2015-7-7 14:13 back.gif
附上AP的LOG:
*Jul 7 05:28:56.336: Starting Ethernet promiscuous mode
*Jul 7 05:29:14.340: %CAP ...

我觉得是AP 坏了, radios 口故障了。
*Jul 7 05:29:44.299: bsnInitRcbSlot: slot 0 has NO radio
*Jul 7 05:29:44.299: bsnInitRcbSlot: slot 1 has NO radio
Slot 0
adminstate ADMIN_DISABLED(2)
radioType Slot is empty
Slot 1
adminstate ADMIN_DISABLED(2)
radioType Slot is empty
不能显示该小部件。