CISCO 5508 SSO cannot log in to the web after switching between active and standby.
Before switching between active and standby management 10.152.1.247 can log in via web and CLI The main equipment redundancy-management 10.152.1.245 can log in with CLI, display the main, and can operate
Backup equipment redundancy-management 10.152.1.246 can log in with CLI, display the backup, unable to operate
After switching management 10.152.1.247 can't log in via web or CLI Backup equipment redundancy-management 10.152.1.245 can log in with CLI, display the backup, and cannot operate
The main device redundancy-management 10.152.1.246 cannot log in via web or CLI
It can be pinged before and after the switch, and the wireless terminal can go online normally
After login into your Aironet Access Point console, enable it#show version //to check your current version. eg AP Running Image : 184.108.40.206#capwap ap ip 10.0.0.101 255.255.255.0 10.0.0.1 //Set an IP address to your CAPWAP AP#show ip int br // to make sure...