思科
AIR-CAP3702E-H-K9
刷了ap3g2-k9w7-tar.153-3.JPJ3a.tar网页不能登陆，
ap#show version
Cisco IOS Software, C3700 Software (AP3G2-K9W7-M), Version 15.3(3)JPJ3a, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupportCopyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Mon 25-May-20 13:09 by prod_rel_team
ROM: Bootstrap program is C3700 boot loader
BOOTLDR: C3700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB, RELEASE SOFTWARE (fc1)
ap uptime is 3 hours, 48 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-k9w7-mx.153-3.JPJ3a/ap3g2-k9w7-xx.153-3.JPJ3a"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-SAP3702E-H-K9 (PowerPC) processor (revision A0) with 376814K/134656K bytes of memory.
Processor board ID FGL2107A7WU
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F8:0B:CB:1B:46:00
Part Number : 73-15397-01
PCB Serial Number : FOC21036F24
Top Assembly Part Number : 068-05055-07
Top Assembly Serial Number : FGL2107A7WU
Top Revision Number : A0
Product/Model Number : AIR-CAP3702E-H-K9
Configuration register is 0xF
ap#show run
Building configuration...
Current configuration : 1717 bytes
!
! Last configuration change at 03:24:36 UTC Mon Mar 1 1993
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
!
logging rate-limit console 9
enable secret 5 $1$I.QC$l05UrlQwjQITtjM3JOxJ.1
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 pause-time 100
dot11 syslog
!
dot11 ssid MySSID
authentication open
guest-mode
!
!
!
no ipv6 cef
!
!
username Cisco password 7 13261E010803
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
shutdown
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
shutdown
antenna gain 0
peakdetect
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
ip address 192.168.0.199 255.255.255.0
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
mac-address f80b.cb1b.4600
ip address 192.168.0.200 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
ip default-gateway 192.168.0.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
求大神有哪里设置错误，有什么办法解决吗？
