我安装了一台WLC2504 与AP 2702使用了WPA2/PSK做认证---------------Show sysinfo---------------
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.1.122.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0
Build Type....................................... DATA + WPS
System Name...................................... CISCO01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 10.10.10.254
IPv6 Address..................................... ::
Last Reset....................................... Power on reset
System Up Time................................... 2 days 0 hrs 40 mins 35 secs
--More-- or (q)uit
System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... TW - Taiwan
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +35 C
External Temperature............................. +41 C
Fan Status....................................... 3200 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 3
Number of Active Clients......................... 4
Burned-in MAC Address............................ 38:ED:18:50:9C:80
Maximum number of APs supported.................. 25
System Nas-Id.................................... CISCO01
WLC MIC Certificate Types........................ SHA1/SHA
以下两个日志讯息代表是?希望各位烦请帮我解答一.
Jan 22 15:50:03
Hostname:10.10.10.254
Severity:warning
Message=' *Dot1x_NW_MsgTask_0: Jan 22 15:49:59.080: %
DOT1X-4-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:508
Max EAPOL-key M1 retransmissions exceeded for client 59:44:98:b5:10:80'
由
Error Message %DOT1X-3-MAX_EAPOL_KEY_RETRANS: Max EAPOL-key M[int] retransmissions exceeded for client [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
Explanation Client authentication failed because the client did not respond to an EAPOL-key message.
Recommended Action Ensure that user credentials are correct on the client and on the AAA server.
找到解决方法是这样,但我无使用802.1X做认证为何会有这样讯息二
系统上面也出现下列日志Message=' *apfMsConnTask_5: Jan 25 13:27:20.997: %APF-4-ASSOCREQ_PROC_FAILED: apf_80211.c:8517 Failed to process an association request from44:39:c4:3e:8d:83. WLAN:1, SSID:MYBODY. mobile indatabase timed out.
请教一下这两个讯息是表示什么意思
