Accessories

We're setting up call recording and listening to the WAV file with my SB561 headset, I can only hear one side of the conversation.I plugged in an SB562 headset and listening to the same file, I can hear both sides of the conversation in each ear.My c...

We are using Jabber phone services in a conference room were a user uses a hearing aide. The user has a hard time hearing the speakers from the camera/speaker/mic system and we added a JBL  charge 5 bluetooth speaker (no microphone) so he could hear ...

We have a customer that is all 8851 phones, and they wanted a small headset that they can wear all day and not over the head.  We opted for the 5200 UC and 5200 Office sets.  We continue to have lots of issues with call quality with them.  Even thoug...

I have a Cisco 562 multi-base headset. The base and the headset will not pair together. The base is just flashing the 5 white LEDs non stop and the headset is flashing it's white LED. After a reset of the phone (CISCO 8811) and the headset being turn...

Jabber shows a name instead of a phone number when you are on an incoming call. Is there a way to get it to display the the number instead? 

Good day, Working with a Room kit Plus, with existing client supplied microphones, The issue we are running into is: When using Cisco Touch 10 - touchpanel when mic mute/un mute is pressed, the touchpanel microphone halo follows the correct state of ...

We have a wall mounted navigator and I wondered if it was possible to convert this to a tabletop version instead?I see there is a wall mount adapter available for the table version, but can't find a table adapter for the wall mount version. Thanks!

Hello,we have dozens of cisco 9971 IP Phones in our stock. As we are using now Grandstream UCM6308 PBX as our communication solution i want to register these Telephones as SIP Phone to my PBX. Can anyone help in this scenario we just need voice calli...

I have two Cisco ATA 191s that I've used in the past.When I powered them on yesterday, both start-up with a solid amber light.I've tried doing a factory reset with a paper clip and neither appears to reset.I've tried different power supplies, no diff...

I am unable to get the full list of the connected headset from the Cisco call manager headset inventory. I do have more than 200 users only using Cisco jabber as their telephony devices to handle the calls. All are using either Cisco or third-party h...

Just bought these headphones.  Updated the firmware.  the Noice cancelling does not work.. there is no difference between engaged and not.How do you get ahold of support?  I've looked for over an hour, I can't find any support resource at all.The box...

When one buys a CISCO CS-CAM-PTZ4K= Camera, does the serial number on the box and on the back of the camera match the serial number found on the inside of the camera? 

Has anyone had any luck getting the Cisco cp-8841 headset to work with the plantronics c054 wireless headset?  He headset button on the phone doesn't see to do anything when lit.  I can however get the headset to work if I lift the handset off the ho...

There is Cisco Webex Board 55S and we need Wall Mount Kit and Floor Stand for it (Webex Board 55 – Floor Stand & Webex Board 55 – Wall Mount Kit), we found these kits are EOS. Kindly we need your advice if we proposed (Cisco Webex Board Pro 55 Wall M...