APIC-EM 1.5

[alpert dalimunte]

hi all,

hi, I have installed APIC-EM 1.5 in VMWare. I've tested discovery with 1 switch and  5 PC connected to the switch. in the Device inventory, i saw the switch but unable to see 5 PC in the host inventory.

any idea for this ?

thanks

[andporra · Accepted solution]

Check the device configuration prerequisites for host inventory in APIC-EM.

You need to turn on SNMP traps and IPDT. Also you will need to run a discovery in that switch.

Hope this helps.

Andres