04-09-2017 05:43 PM - last edited on 03-25-2019 01:21 PM by ciscomoderator
Hi
when I make ASA service graph for EPG to External routed network in ACI,
it is not working... function connector is not generated
but, when I make ASA servcie graph for EPG to EPG, it is ok
I capture the screen shot and attach it
please give me advice and what is problem
thank you
04-12-2017 07:04 AM
Hi, songyh068.
Did you configure for Route Peering path as L3Out?
See also:
L4-L7 Route Peering with Transit Fabric - Configuration Walkthrough
http://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/200407-L4-L7-Route-Peering-with-Transit-Fabric.html
04-15-2017 03:56 AM
04-15-2017 05:38 AM
Hi, songyh068.
Do you show me the faults of asa_out?
Regards,
04-15-2017 06:30 AM
excuse me
this is below fault of asa_out
if it is not you want, tell me what you need detail, I will capture and send you
(i am very beginner)
thank you
excuse me
you mean the fault of asa_out_EPG ??
I will capture tommorow and reply
thank you
04-15-2017 06:33 AM
Hi, songyh068.
Thank you!
If you can, do you share your whole configuration?
Regards,
04-15-2017 09:51 AM
OK
my lab is shared with many people so it is very complicated
anyway, I will update whole config tomorrow
i appreciate you
04-16-2017 01:58 AM
HI
I made it
I completed asa_out , really thank you!!
first of all, I just update whole config!!!
now, I am finally making service graph for EPG to external routed EPG
Iam not yet finishing making service graph, but I think it will be no problem
if I have some problems, I will update again
04-16-2017 02:14 AM
Hi, songyh068.
Thanks for the good news!
Please contact me again if there is a problem.
Regards,
04-23-2017 12:10 AM
HI!!
I need your help, could you see my log?
I config the same like
I configurated http://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/200407-L4-L7-Route-Peering-with-Transit-Fabric.html
but... It doesn't working.... I can't see any config in ASA like before my first problems
I don't know what is problem..... I am troubleshooting for a week...
I upload all config of my tenant
please advise me
thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: