Application Centric Infrastructure

Cisco ACI labels with vzany contract

Hi, I need help with Cisco ACI labels that apply to vzany. My customer have a vrf with 120 ESGs and two External EPGs (EEPG-1 and EEPG-2) and service graph for Firewall insertion in PBR, the requirements are - All traffic between the ESGs and with EE...

VetR Zip logs

Hi All , What is VetR Zip logs logs in CiscoACI ,and what is the procedure to get this logs from the Controller

ACI Multipod | steps to replace and activate the the standby APIC

Hi Freindsin ACI Multipod , the 1st site has 2 APICs whereas the 2nd site has the 3rd APIC with a Standby APIC for Quorum matter , lets say the APIC in the 2nd site is corrupted so what are the steps to replace and activate the the standby APIC Tha...

ACI fabric links swapped

Hello,Lets assume we have deployed ACI infra.Leaf1:53-spine1:1/1Leaf1:54-spine1:1/2I wonder if switch will connect to fabric without issues when cables would be swapped in such manner (let say switch was moved physically and was reconnected leaf to s...

Does turning off MCP cause downtime?

Hi all, I have an issue where I have exceeded the 2000 VLANs + port MCP limit on multiple Leaf switches. I am considering turning off MCP towards non loop inducing devices, such as bare-metal servers and L3 devices to help mitigate this limit. My que...

Fault Code: F0467

Can someone help explain how i can go about resolving this warning in my aci.I attached the warning

Resolved! Contract - vzAny Error - F0467

Hello, a customer has the following problem: After configuring some contracts, he partially bound them to various EPGs as a provider and consumer. Often a contract is tied to an EPG as a provider and consumer.The customer then found that the TCAM wa...

fabricNode list including select children

Looking to make a REST call to the API to list all fabricNodes and include a selection of children (or all if a selection isn't possible) children of each fabricNode. I already have the API call for listing all fabricNodes, but can't seem to figure o...

Resolved! ACI : EPG with same VLAN encapsulation on different domains

Hi, I have an ACI pod which connected to my old network. Most of endpoints are VMs in ESX hosts and ESX hosts connected to the old network. I want to migrate gateways from the old network to ACI and gradually connect ESX hosts to ACI as VMM domain. ...

Resolved! Cisco ACI

Can any one clarify the below points.Is it recomended to change the CISCO ACI Root/Admin password every 3months.Does this will create any issues?Spine & Leaf config sync / communication will happen by using Admin/Root credentials?

Resolved! ACI 6.0 Leaf/Spine mgmt0 Interface Description

Is there a way to add description (that will appear on CLI "show interface description") to mgmt0 using the APIC v6 GUI?I'm seeing posts that talk to API and CLI methods. Our operations team will only use the GUI to configure, and the CLI only to in...

APIC Replacement - Log History Backup

I am following on this document Cisco APIC M1/M2/M3/L1/L2/M3 to M4/L4 Cluster Migration, Release 5.3(1) - Cisco to replace APIC-M2 with APIC-M4.It suggests that "...When you decommission a Cisco APIC, the APIC loses all fault, event, and audit log hi...

mgmt0 cdp/lldp

I'm having trouble seeing where to enable cdp and lldp on the oob/mgmt0 interfaces in the fabric; can anyone help?

rfs2_enc storage is at 90% utilization

One of my APIC server has rfs2_enc storage at 90%. I wipe the server clean and added back to cluster but this iss

Resolved! replace gen 1 ACI spine with new model

Hi, We are currently running a multi-pod fabric (version 4.2.7), with N9K-C9336PQ spine switches. New spines will be the N9K-C9316D-GX I am trying to find a procedure for this swap and also for specific tips and tricks. Especially I would like to he...