Can you please share your thoughts on how to configure Overlapping subnets in Tenants .
Tenant A -- VRF A - BD 1 - subnet 10.1.100.0/24
|------- VRF B - BD - Subnet : 10.1.100.0/24
Does this feature available in within ACI , do we ...
Is there any best practice doc explaining how to upgrade ACI that is integrated with vsphere environment? What are dependencies? In particular, if both components should be upgraded (ACI from 1.x to 2.x and vCenter from 5.5 to 6.0), which piece shoul...
Hello Experts of ACI,
I'm having a hard time understanding the in depth the behind the scenes about this new tech, so I deciced to ask for people that have experimented and deployed this ACI infra and share with me a brief experience and get me out...
Can you please provide some insight into best practice for setting up L2/L3 out for a ACI fabric.
Q1 : Is a better practise to keep L2/L3 out in common or Infra tenant , If yes , please explain.
Q2 : what is best standard to provision AD...
Can you please explain which scenario we will be using enabling Virtual and primary ipaddress in Subnet under Bridge domain.
Also What is difference between custom and virtual mac address and which scenario we can use this ?
My goal is moving from legacy core to ACI bare metal servers (BMS) like Hyper-V or ESXi hypervisors which need multiple Vlans. These servers are NOT using VMM integration. The ACI version is 2.2.(1o)
EPG-BMS has two Static Ports:
I have one APIC controller with 1 spine and 2 leafs with cluster size is 3.
Whenever I try adding a second APIC, I get to the point where the new APIC status is: "Data Layer Partially Diverged".
Note that the second APIC has a different manag...
Could you please provide your thoughts on the below queries .
How is Control Plane and data plane traffic segmented in Cisco ACI. How many L2/L3 out construct we can can create per Bridge Domain , Per VRF and Tenant , Please let us...
Can we configure more than one vlan encap in static path binding to a leaf port to extend the traffic to outside of the ACI topology which is similar to vlan trunk configuration in legacy L2 switch configuration?
my Customer have some limitations on its Firewalls so a limited number of Subinterfaces can be configured. So i can't define all the needed L3OUT.
My Customer wants that teh traffic between 2 Tenants (between 1 VRF 1 Inside a Tenant 1 to 1 VRF...
Our VMware Infra is divided into multiple clusters within single VMware Datacenter. We plan to use one DVS per Cluster, which means multiple DVS under on datacenter.
When VMM integration is done between vCenter and APIC -
Q1) do we have to...