Join the ACI conversation. Jump into this space for access to peers and industry experts. You’ll find the latest updates, helpful resources, and assistance when you need it.
Hi All,
I am in process of evaluating Nexus 9k for my Data Center. Need expert opinion from my friends on considerations for ACI w.r.t network and Infrastructure as we have IBM chassis, Hyper V and VMware in our DC.
Cheers
Hi,
I want to upgrade the APIC from 1.2(3h) to 1.3(2) and looking at upgrade procedure and recommended paths at:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/apic_upgrade_downgrade/b_APIC_Software_Upgrade_Downgrade_Guid...
Hi all,
quick question:
When you configure the APICs one by one, and once you have configured two of them, are you supposed to see the second one in the GUI topology view once you have browsed and logged into the first ?
Note: There is no Spine or Le...
Hi,
I'm setting up a lab of ACI.
I've received 3 APIC servers to create a cluster.
and I've received 2 Leafs - yet my order of the Spine is being delayed.
I was wondering if I can use one of the Leafs as Spine ?
one more question - do I have to conn...
Hi
Can we a have a dual fabric deployment of Cisco ACI integrated with a single instance multi site deployment of Openstack?If this is possible do I lose out on any functionality compared to a design where Openstack integrates with only one Cisco AC...
I'm trying to understand more for ACI network-centric L2 design where ACI is just a transit L2 network, why do we need EGP and BD mapping as 1:1?
assuming I have web/app/db EPG, instead of creating 3 BDs to map them, what's the impact if I just use ...
Good morning,
I have a really strange problem :
I added a fex to the fabric as usual, the fex comes online, but when I go in the tenant to add a port from the fex to the EPG's, the selection doesn't show the new fex interfaces.
The fex is in the in...
Hello. Helped pick up the equipment for the organization of ip video surveillance business, the Enterprise on an area of about 700 square meters with ststemy integrated access control and alarm systems . It will be used 200 ip video cameras. An ent...
I have a group of ports statically mapped to the same EPG and VLAN on my ACI fabric. One of the ports connects to an uplink port on a 3750x stack. From the hosts on the fabric, I cannot ping hosts on the 3750 until I initiate traffic from the hosts...
Hi,
I have tried to upgrade the APICs of the ACI infrastructure to the version 1.2(3c) but the upgrade wasn't sucessfull and when the APIC reboot, it try to boot in the new version, but there are not this version installed. So I need to select manua...
Hi, Two of my controller suffer from a kernel panic when booting up (see screens attached) .Can you please advise how do I reinstall it? I have DVD with the latest software already burned and ready to go.Is it as simple as installing new linux softwa...
I have created a rather successful setup in terms of vmware integration and one tenant. From my point of view all important things are properly configured, but I still have some issues. I won't go into details unless it turns out absolutely necessary...
Hi
1) what are the license requirement for nexus 9508 and nexus 93128 to install and configure as spine and leaf ACI fabric mode.
2) Is there any installation and configuration study documents available for the same?
Hi,
I tried to implement BFD for static routes using SVI. However, the static route will be disappeared from the routing table when BFD is enabled.
I have tried both BFD global and interface override policy but not successful.
Any suggestion?
Btw, ...
I have a simple question. I am still on a basic level of ACI setup, version 1.3. Trying to figure out how things should be done etc.
So, I managed to connect to my vcenter. This is obviously being done through management VRF because I do not have a...
