Application Centric Infrastructure

Hi  After building a new fabric I have noticed the following interfaces are built on each leaf, can you confirm what the purpose of these interfaces?vlan9, Interface status: protocol-up/link-up/admin-up, iod: 118,  IP address: 10.0.0.30, IP subnet: 1...

Hi Experts When you assign a EPG to a Leaf port and is not making any Fabric access-policy do that port,  what will the port/fabric Do, is thera any default Policy that is working/running in that case ?Which 1 Gig SFP is supported on the Leaf 9396 we...

Hi,I am considering to plan for the stretch fabric design over full meshed or separate fabrics in the three data centers located within 300 meters of range from each other and possibly huge fibers are available to interconnect them.All three data cen...

Hi expertsI tried to make a L2 connection between 2 EPG in different BD, both BD are in L2 mode and in the same Private network, I saw in the sniffer that the traffic was send between the EPG ( hosts)  but the "ping" between the hosts did not got ans...

Hi Experts,I have a quick question about Normalized Forwarding of ACI Fabric.Does ACI support a VXLAN Tunnel between Leaf(Leaves) and VMware-vDS, and MS-vSwtich? Otherwise any plan to provide that function in the future?If there is no function and pl...

Hi,Cisco ACI. Do I really need a physical switch to implement ACI with Azure Pack? 

Hi Experts Where can i find the ROOT password when i need to access some Logs regadring syslog setup/Ola★ CLI Commands ➡ cat /etc/syslog-startup.conf ➡ cat /etc/syslog-startup.conf.busybox ➡ cat /etc/syslog.conf ➡ cat /var/log/external/message ➡ (roo...

Hi,when will the 9372TX work as a leaf? it has the new 6-port module and that was added in the latest update but the 9372TX not?regards,Michael 

Hi  I am trying to restore the fabric configuration and I am unable to connect to sftp server. I noticed the following error: Configuration failed for EPG oob due to Not Associated With Management Zone Any ideas? 

I am struggling  with ACI mode and are trying to configure a pair of  VPC client connections  config,  against a UCS system and a router. I noticed that when i used the same Policy Group in the interface profile  only got one VPC up and running, i wa...

Hello ACI team,I would like to confirm please how to manage the configuration in case a tenant has both Internet (static route to FW) and MPLS (ospf NSSA) connectivity via the fabric , can a same BD have two external L3 outs (one for static and other...

Hi I am trying to install the VSUM.ova and after the VM is built I do not see any new icon's within Vcenter, can anyone help? Ben

Hi I have recently recorded what is required to build OSPF peering between ACI and external network, is it possible to upload the video to the forum? ThanksBen