07-12-2020 07:16 PM
Hi all, i have:
EPG-10 (10.10.10.2, 10.10.10.3 ) link BD-10 (gateway 10.10.10.1/24)
EPG-20 (10.10.20.2, 10.10.20.3 ) link BD-20 (gateway 10.10.20.1/24)
i not intergrate VMM domain in ACI and i want create useg EPG (10.10.10.3, 10.10.20.2). can i do it? and useg EPG links to which BD?
07-12-2020 10:22 PM - edited 07-12-2020 10:23 PM
Hi @PTA90
What you described there, you cannot achieve because the base EPG and the uEPG must be associated to the same BD.
Since you have 2x BDs, this is not possible with uEPG..
However, you can configure an ESG (Endpoint Segment Group) to achieve what you want:
You can find more details about this in the ESG config guide:
Note: this feature is supported starting with ACI 5.0
Stay safe,
Sergiu
07-12-2020 11:18 PM
Thank msdaniluk,
i can create new BD with 2 subnet of BD-10 and BD-20 and Useg EPG link to this new BD ?
Can i do it?
07-13-2020 12:44 PM
Yes this is possible.
Sergiu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide