06-12-2019 06:23 AM
I want to connect new physical server to our aci infrastructure.
Please share step by step procedure for the same.
Solved! Go to Solution.
06-12-2019 10:40 AM
Hi Anoop,
I had done a writeup on server on-boarding sometime back, hope that's the type of material you are looking for to start with. Please click on the link below:
Connecting Physical Servers To Cisco ACI Fabric - Simplified!
Let me know if you have any specific query.
Regards,
Jayesh
***Rate all posts that are helpful. Mark it as a solution if that solves your problem, it may help other users who have the same query.***
06-12-2019 07:06 AM
Hi Anoop,
Just follow the proc to deploy Bare-metal servers, with Physical Domain and then Interface configuration:
Then assign the EPGs to the physical ports prepared in the previous step:
Remi Astruc
06-12-2019 07:30 AM
Thanks Remi,
I am new to aci, i will appriciate if you will give me more simple solution for my requirement.
step by step procedure in plan English language.
06-12-2019 08:25 AM
Hello,
That is precisely a simple step by step procedure in English and even with screenshots.
An even more simple proc would require to know your switch IDs and design, VPC requirements, Interface IDs, Server network config, App/EPG information, etc... which is difficult here.
Remi Astruc
06-12-2019 09:44 AM
ok, i will gather all these details and share with you.
06-12-2019 10:40 AM
Hi Anoop,
I had done a writeup on server on-boarding sometime back, hope that's the type of material you are looking for to start with. Please click on the link below:
Connecting Physical Servers To Cisco ACI Fabric - Simplified!
Let me know if you have any specific query.
Regards,
Jayesh
***Rate all posts that are helpful. Mark it as a solution if that solves your problem, it may help other users who have the same query.***
06-13-2019 03:56 AM
appreciate your effort.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide