cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5034
Views
5
Helpful
3
Replies

ACI - F1651 - How to resolve fault related to tech support upload failure

ju.mahieu
Level 1
Level 1

Running version : 2.1(1h)

Hi,

This morning I tried to upload tech support file to my laptop. The export operation failed probably because my Ftp server was not correctly configured. Finally, the tech support has been collected directly from the controller. 

But now, I have the following fault :

F1651
minor
2017-02-03T09:15:34.237+01:00
Raised
expcont/expstatus-tsod-default
Upload triggered at 2017-02-03T12:48:15.896+01:00 for policy tsod-default failed . Check operational status for details.
Explanation:
This fault occurs when export operation for techsupport or core files did not succeed.
Recommended Action:
If you see this fault, take the following actions:
    look at techsupport status and figure out which IFC/node is erroring out.
    Verify the destination it is trying to export data to is healthy/reachable
    If the above action did not resolve the issue, contact Cisco TAC.

So, How can I remove the F1651 fault ?

Regards,

Ju

1 Accepted Solution

Accepted Solutions

Robert Burns
Cisco Employee
Cisco Employee

Delete the export task.

Robert

View solution in original post

3 Replies 3

Robert Burns
Cisco Employee
Cisco Employee

Delete the export task.

Robert

Thank you Robert.

It works :-)

Hi Robert,

 

I have the same issue but there is no any task available, as shown in the attached files.

 

Thanks

Save 25% on Day-2 Operations Add-On License