ACI -- L3out and L2 on same interface ?

[raj.siva]

Hi guys

We have connected Border leaf to a DIST switch, physically, and running L3out out of this interface (using SVI's and VLANs).  

Say BL E1/1 connects to E1/1 in DIST

E1/1 is mapped to L3out-domain which has the VLANs 888/889 (say) which is used for EIGRP neighborship.

We want to extend few production VLANs from the same interface - Say VLAN 100,101 etc. These VLANs are a part of PROD VLAN pool. Can we use the same physical interface and extend both L2 trunk, and L3 out ? 

Regards

[raj.siva · Accepted solution]

Thanks. we implemented this and it worked.