ACI Leaf Swith Port to APIC Configuration

[snarayanaraju]

Hello All - Just a conceptual question. We connect APIC Interface 1 and 3 to Leaf 101 and Leaf 102. So APIC is Dual Homed

Should we explicitly configure VPC on the Leaf Ports that connect to the APIC Controller to enable both the Ports on the Port-Channel

[Robert Burns · Accepted solution]

No.  APIC fabric connections are active/standby.  No need to configure anything.

Robert

[snarayanaraju]

Thank you Robert. Do you mean to say that, only one Interface pass the traffic between the Leaf and the APIC server and other Interface is Standby?

[Robert Burns]

Correct.

Robert

[snarayanaraju]

Thank you Robert