Hello, I am a newbie on ACI that is why I am trying to learn it from simulator first. We do have the ACI at work, but I wanted to practice in simulator first since I am new to this.
Does anyone had an issue accessing APIC after the successful ACI simulator install? I can't ping or hit the https access.
I kept all the default, I am using VLAN50 for the management IP. I have another windows machine on the same POrt-Group (VLAN50) in VCENTER DVSwitch that I can ping. My windows machine is 172.16.0.5/24 and GW is 172.16.0.1/24. My APIC is 172.16.0.2/24.
I tried changing to VLAN50 in APIC setup and still not able to ping or access it via https.
I also enabled promiscuous mode in my DVport-group.
Did I missed anything?
BTW, not sure if there is an issue with hardware compatibility for ACI simulator? I am using dell r610 12 core CPU, 64gb ram, 2tb ssd NAS. I don't have the UCS system in hy homelab.
Thanks in advance!
I've deployed the ACI 5.0 on an ESXI 6.7 hypervisor. Had the same issue, solution was to enable promiscuous mode and the other two security features (Mac address changes, forged transfer) for the virtual switch.
@afassl2004 thank you very much - this was the fix for me. Following the documentation I already had promiscuous mode enabled but could not ping. When I enabled MAC address changes and forged transmits I was almost immediately able to ping the ACI Simulator 4.2(x).
Did you ever find a fix for this? I am running into the exact same problem. I have the vswitch configured with promiscuous mode as well as the mac and forged transmits are set to accept. I have other vms that are on the same vswitch and network and they are working fine. I have tried resetting the vm as well as reinstalling with no luck.
I've written some blog articles on how to install ACI on ESXi and other topics.
Maybe this is helpful?