ACI Simulator : can DB/EPG be defined in ACI to communicate with VMs defined on the ESX's vswitchs ?
i installed ACI Simulator (2.3(4d)) , it is a perfect solution to test north API REST (i test ANSIBLE scripts that way) but i want to go further :
- Can i connect a Client VM to one BD/EPG defined in my ACI Simulator?
- Can i connect a VM on the ACI Simulator's Leafs ? I'm thinking about the following design : the [VM - ACI Simultor] sharing a common ESXi's switch on which the client VM has a NIC connected to also ?
What to do when you don't have access to an SCP server during an N3K upgrade that requires compaction/compacting.
Some of the Nexus 3k switches require that you manually compact the image in order for it to fit on the bootflash of the swit...
Hi all,not sure this is the right place to raise my question..if not..beg you pardon.problem: I have to interconnect 2 datacenter with 2 links 10gb each so...10+10physical connection is DWDM (dark fiber) and each datacenter has is own nexus93108 (as ...
Learn about new product capabilities from Cisco product managers in live interactive briefings throughout October. Open to all customers through Cisco’s Customer Connection program.
Join the Cisco Customer Connection program to attend. Membership i...
Description:Fault delegate: A Fabric Node Group (fabricNodeGrp) configuration was not deployed on the fabric node 152 because: Node Not Registered for Node Group Policies Type:Config Cause:configuration-failed Change Set:deplSt:not-register...
<original blog published on cisco @ https://blogs.cisco.com/datacenter/cisco-mds-32g-fibre-channel-fabric-switches-small-doesnt-mean-less >
When we think about fabric switches, we tend to consider low-end hardware. These typically do ...