cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
3198
Views
5
Helpful
5
Replies
goranje
Beginner

ACI simulator not accessible on UI

Hello,

 

We have installed AVI simulator VM .ova file on our environment

We followed the instruction and leave all default settings, after that the ACI is accessible via console with admin user and pass.

But we can not access the UI on https.

The login page is not even displayed. It seems that the simulator is not listening on https port.

Do any one have this issues?

Any idea what to check/do next?

 

Best regards,

1 ACCEPTED SOLUTION

Accepted Solutions

We solved the problem, the issue was that colleagues assumed that the port-group was by default in promiscuous mode, but it was not.

We put also the port-group in promiscuous mode and it was ok.

   

View solution in original post

5 REPLIES 5
Francesco Molino
VIP Mentor

Hi

When doing the initial setup, it asks you for an ip address on vlan 4 (infrastructure vlan). Did you attach the correct vmware port-group for vlan 4 on your 1st nic?

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

We solved the problem, the issue was that colleagues assumed that the port-group was by default in promiscuous mode, but it was not.

We put also the port-group in promiscuous mode and it was ok.

   

View solution in original post

Hi @goranje,

 

Thank you very much for posting the details of the fix.  This is always very helpful!

 

Claudia

You're welcome

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question
Aymen AL-Ramadan
Beginner

 

In case , if anyone wondering how to change the Promiscuous mode from Exsi, please see the pic. 

Screenshot 2021-08-18 124644.png