Hi Team ,
we have some issues when we tried to integrate VMM.
when we push the DVS into vcenter , all looks fine . and we add one ESX host into that DVS. but for some reason , it keep to use lldp (even my interface-polict disabled the lldp and enable the cdp only )
every time I have to ask server guy to change to CDP in ESXi side
not sure why
Solved! Go to Solution.
Should never have to touch CDP on the host side. All policies push from APIC, if not you have a problem.
Did you configured a vSwitch policy under the VMM domain to Disable LLDP and Enable CDP? LLDP defaults to enable, CDP defaults to disabled, so you need specific policies for both defined under the VMM domain.
You might very well have an Interface Policy, but if you want the settings to push to ESX, you need the vSwitch policy.
You can use the API to change the settings also. See if that works.
Use postman or similar to push the config change. This will tell you if its a UI issue or otherwise.
another thing need to mention , we only deployed DVS , not AVS
1. our understanding is when interface-policy defined lldp disable and cdp enable , when deploy the DVS , all policy should stay the same
2. in the wizard of the VMM domain , the Vswitch policy part is only of AVS ? or it is for DVS as well ?