10-16-2017 10:51 AM - edited 03-01-2019 05:21 AM
Hello All,
After upgrading the CIMC using Host Upgrade Utility from 2.0(3) to to 2.0(13n) ... using "Upgrade All" option
After upgrade when Server boots to APIC/ACI software 2.2(1n) it fails with the following message !!!!
"No key available with this passphrase"
"No key available with this passphrase"
Password (/dev/mapper/vg_ifc0-rfs1):
What am I missing here ?
Thanks and Regards:
BF
10-17-2017 06:52 AM
Hi Guys,
Solved it, two things were hapenning:
1. I was going for a not supported version of CIMC ... should be using 2.0(13i) .... and not 2.0(13n)
2. The CIMC upgrade deactivates TPM, need to manually activate it on BIOS (not in CIMC, directly on BIOS configuration)
Now it's OK
Regards,
BF
Thanks To Mr. Robert Burns
03-07-2019 12:51 PM
Your post just saved me a TAC case. Thanks! Not sure why TPM would get disabled in the BIOS when the CIMC BIOS setting is 'Enabled'...
thanks again!
02-13-2020 12:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide