cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
935
Views
0
Helpful
1
Replies
alpert dalimunte
Beginner

APIC-EM 1.5

hi all,

 

 

hi, I have installed APIC-EM 1.5 in VMWare. I've tested discovery with 1 switch and  5 PC connected to the switch. in the Device inventory, i saw the switch but unable to see 5 PC in the host inventory.

 

any idea for this ?

 

thanks

 

1 ACCEPTED SOLUTION

Accepted Solutions
andporra
Cisco Employee

Check the device configuration prerequisites for host inventory in APIC-EM.

 

You need to turn on SNMP traps and IPDT. Also you will need to run a discovery in that switch.

 

Hope this helps.

 

Andres

View solution in original post

1 REPLY 1
andporra
Cisco Employee

Check the device configuration prerequisites for host inventory in APIC-EM.

 

You need to turn on SNMP traps and IPDT. Also you will need to run a discovery in that switch.

 

Hope this helps.

 

Andres