I have a customer who is looking to move DR site on AWS by leveraging Cisco Cloud ACI. I am trying to find a customer success story to share with my client. I will apprecaite if someone can share a link of a success story since I am not able to...
Forum Posts
OK, I've beaten my head against the wall on this one for a while now, so I'm asking for help.I have an ACI environment about a year or so ago I needed to expand it from a single POD to a Multipod deployment. I had the bright idea of decommissioning o...
Hi, I was deployed Physical APIC Controller (Mini ACI) into our customer UTP Based Leaf (N9K-C93108TC-FX3P). The APIC Controller use VIC1455 / APIC-PCIE-C25Q-04 and I added that VIC with SFP-10G-T-X for connect to the Leaf, In Leaf side the LED was g...
Configured OOB IPs for the interfaces in the ACISIM.but I am not able to access them as i am observing the mgmt0 interface in switching disabled state.
G'day everyone, I'm building the ACI Multi Site. There are 2 DCs connected via Dark Fiber (DF). I have 2 switches allocated to build an ISN. There are going to be a few other services *(L2 only) to use DF as well, such as FW HA, LB HA etc. I decided ...
I have a 2-site ACI fabric test lab that I'm deploying from scratch using Nexus Dashboard 2.3(2d), and Nexus Dashboard Orchestrator 4.1.2h. APICs at both sites are running 5.2(6e), and Spines are N9K-C9364C running 15.2(6e). The config appears to dep...
I have a 2-site ACI fabric test lab that I'm deploying from scratch using Nexus Dashboard 2.3(2d), and Nexus Dashboard Orchestrator 4.1.2h. APICs at both sites are running 5.2(6e), and Spines are N9K-C9364C running 15.2(6e).The config appears to depl...
Hi, I am doing automation with creating BD with DHCP relay policy config, via REST API. We had to put the DHCP relay policy on APIC, instead of the MSO. So, after creating the BD in MSO, a template deployment on MSO, the BD appears on the APIC. Th...
Hi Fellas, we have a working PBR in an ACI Multi site setup. The ACI is re-directing some East-West EPG traffic to the local DCFW using PBR/contracts. There is some new requirement that has come up to stretch a BD across the 2 sites, due to which I n...
Resolved! asymmetric routing L3OUT and IPN/ISN
L3OUT and IPN/ISN connectivity termintaed on the same device. How do we prevent asymmetric routing for incoming traffic.For example for traffic going to ACI site B, how do we make sure that retrun traffic use IPN/ISN link and not the L3OUT to reach A...
Hi Everyone, I'm deploying the MultiSite ACI for one of the customers. The cusomer has a naming standard. I'm a bit confused about choosing the names for the spines and leafs. I have 2 sites: Ballarat and Midland From the management perspective I ten...
I have the 3-node physical ND appliances running v2.1(2d) with NDO v3.6(1e) for ACI multi-site. 1. Does ND and/or NDO have the capability to send email alerts/alarms? I assume no as I did not find any options regards.2. How can I generate a CSR on ND...
Resolved! ACI Back to Back VRF
Hi,I have installed and configured ACI at one of our data centres and I now need to do the same at our secondary data centre using the back to back setup rather than IPN. I was planning on connecting the spines up to our WAN routers and wondered if ...
Hi guys, We are planning to add Multipod on an existing Multisite setup. Is there a guide or steps that we need to follow. Have someone done this before? We couldnt find any guide anywhere. I have read the guide for Multipod but this didnt mentioned...
Unable to validate provider. Please check you configuration.Nexus Dashboard , when I configured the provider DNS for the first time , it said that it cannot validate it but why?I followed the steps, it arrives to the dns server but still it can't v...
