Hi GuysI received a RMA from Cisco to replace an APIC Server (M2 Model). After unboxing the server and completing the setup with sucessfully. I encountered an issue with the OOB interfaces. The interfaces are not working and remain in a down status e...
Forum Posts
Resolved! Total Ingress Bytes graph
Hi, Sorry for the dumb question but I do not understand why I have a graph like below when checking an interface.From my understanding, Total Ingress Bytes is a cumulative counter (https://community.cisco.com/t5/application-centric-infrastructure/tot...
I've been asked to deploy APIC on a VM PC running Ubuntu. Does anyone have the deployment guide and a copy of the SW to install? TIA
Resolved! Continuous ping in ACI console
Dear Allplease how can I stop continuse ping from ACI console I try ctrl+c but still pinging and try ctrl+shift+6 still pinging
Resolved! APIC firmware upgrade failure?
Hi, So, recently i tried to upgrade an APIC-server-M2 firmware with the recommended HUU iso acoording to the version of ACI software: specificly i tried to upgrade from 2.0(3i) to 4.1(2b) of firmware and ACI 4.2(1j) as specified in the release notes....
Let's say I'm on a spine switch and I lookup the location of a mac address (based on the spine's coop database). If the spine returns the VPC IP address representing a VPC pair I was told to use 'show vpc map | egrep "x.x.x.x"' from the APIC to dete...
On a brand new ACI v5.2(8e) fabric, I found there is this F3588 minor fault about "plugin-Cisco_ApicVision" installation failure, screenshot is attached...I assume this plugin came with the APIC software as I never manually try to install it and this...
Hello,For some raisons, we want to add a static route for APIC OOB mgmt. By default, when we type "route -n" command on the apic cli; we find a default route 0.0.0.0/0 GW: y.y.y.254, now we want to add another route like 10.x.x.x/24 GW: y.y.y.253In t...
Question#1: ACI supports configuration of Interface delay and bandwidth for EIGRP but it seems like those settings are per L3Out. Anyway to set delay or bandwidth per Interface for EIGRP? Question#2: What would be the use case(s) of Passive interface...
Resolved! ACI simulator replacement
Hi Looks like cisco ACI simulator cannot connect to endpoint device. Is this true? for example after we complete configuration of all policies on the simulator for PC1 connected to leaf1 to communicate with PC2 connected to leaf2, we cannot confirm i...
@aci @APIC @datacenter @aci6.0 @apicM4, Cisco ACI, Other ACI Topics, APIC, 1. APIC(v6.0(3d)) is connected to Leaf 93180YC-FX3 switch, Leaf is discovered. but Leaf 93180YC-FX3 (port 49,50,51,52) connected to Spine1(port 1/1,2) and Spine2(port 1/1,2) i...
Hi Plz see below. Why the first Leaf is not showing up after the simulator is setup. Anyone can provide suggestion ? Thanks
Resolved! uSeg EPG contracts deny
I have some questionsI tried to implement uSeg and didn't understand behaviourI have EPG APP with enforced behaviuor.I made two uSeg epg and without contracts they couldn't speak each other - it's good. After it I permited RDP session between them th...
Hi,We have a lot of Epg - static path on each physical port on the fabric.I would like to find an easy way (Gui, CLI or Ansible) to default an interface and delete all the static path binded ? Below an example of the configuration I need to delete:mo...
Introduction to the World of Cisco ACI APICsAt the heart of the Cisco ACI (Application Centric Infrastructure) infrastructure lies an essential component known as the APIC (Application Policy Infrastructure Controller). This key element is implemen...
