Hello,We're unable to connect APIC-M4 to leaf's (N9K-C93180YC-FX3) uplink ports using CVR-QSFP-SFP10G adapter. We've tried converting port to downlink but it shows "out of service" status in CLI and invalid status in APIC GUI.We're really short on ac...
Forum Posts
Hi everyone. Please assist here. What are the things we need to include in a UAT as test cases for Cisco ACI? It will be like one of the service provider is having their ACI environment for other customers to host their own application and servers i...
Hello , Did Someone have a Logic Explanation , why we use the PI Vlan (Internal Vlan) on ACI? and What is the Role of PI Vlan ? i Know That the FD (Forwarding Vlan ) have always To be maped to an PI vlan , but the Question is Why ? and Why we need...
Resolved! DHCP Relay in BD with Multiple subnets
I have a BD which has two subnets. The BD is mapped to Two EPGs each mapped to different subnets. I am configuring a DHCP relay that provides an IP Address from the primary subnet even if the host is connected to second EPG with a non-primary subnet ...
Hello Guys, Can you plz help me to know if SCP protocol on APIC controller is globally configured? If yes, where to see it? If no, then how to configure?
Hi Everyone,Maybe this topic was somewhere here already but I cannot find any information so I am hoping that you will help me some way.I have vCenter integrated with APIC and I check everything, have IP etc.... but one thing which I cannot establish...
We have been working to reduce our network footprint in our on premise datacenter. Because of the shrinking data center we have decided to replace our ACI environment with Nexus and FEXs without ACI. All of the existing ACI equipment is on end-of-sup...
Hi GuysI received a RMA from Cisco to replace an APIC Server (M2 Model). After unboxing the server and completing the setup with sucessfully. I encountered an issue with the OOB interfaces. The interfaces are not working and remain in a down status e...
Resolved! Total Ingress Bytes graph
Hi, Sorry for the dumb question but I do not understand why I have a graph like below when checking an interface.From my understanding, Total Ingress Bytes is a cumulative counter (https://community.cisco.com/t5/application-centric-infrastructure/tot...
I've been asked to deploy APIC on a VM PC running Ubuntu. Does anyone have the deployment guide and a copy of the SW to install? TIA
We are considering upgrading our ACI infrastructure from software version 5.2(8g) to 6.0(3e)(F) to allow for enhanced SFP & cable compatibility required for a project. I was wondering if anyone would know when we can expect version 6 to become a 'Cis...
Hi,I would like to activate ERSPAN and send "major" EPG traffic to a probe. As I do not know how many bandwidth these EPG are consuming, I'm wondering if there is any risk that I can saturate the linksbetween Leaf & Spine by activating ERSPAN?Thanks ...
Greetings, I understand that there is one VTEP per pair of Leaf Switches and so there might be many VPC's hanging on that Leaf. So for example VPC1 and VPC2 is connected to both Leaf1 and Leaf2 and there will be one VTEP representing the VPC domain...
Question for those running the new APIC M4. Do you see 4 or 6 interfaces on the interface tab of the APIC in the GUI. Historically i have seen 4 but with the APIC M4 ACI 6.03, i see six. Fabric is discovered, database is fully fit, F0103 alarms ar...
Hello, we need to have several tenants in our multipod ACI fabric. this has a scalability background. so in the end it is one big shared fabric. now the question is we are configuring different tenants if we need to have separate vlan pools and physi...
