Hi all, for a given ACI Design with more than one tenant we have the requirement to extend one L2 Domain to another Tenant because of smooth migrating different systems. We would like to move from network centric to application centric and because o...
Forum Posts
Resolved! ACI Kubernetes provisioning tool
Hi,I've downloaded the "dist-generics-4.2.2.2.tar.gz" packet for Kubernetes integration with Ubuntu 18.04 from Cisco.com and, after decompressing the .tar, I don't see any .deb file to install and then run the provissioning tool. What's the procedure...
I have ip flapping issue in cisco ACI environmentas the topology:I found that when icmp reply from 168.1.37.129 to 168.1.37.45,these icmp reply packets will be sent to SW13 and SW14 at the same time,the icmp reply packets which sent to SW13 with S-I...
Hey guys,I need to carry out a PoC for using Cisco ACI in both of our datacenters.Can you tell me if there is kind of a cisco aci lab that doesn't cost that much?Or can you tell me cheap switches where I could run ACI with? Thank you very much!
Hi,I would like to collect the following counter through moquery ? apic3# fabric 101 show interface e1/1 counters detailed all----------------------------------------------------------------Node 101 (leaf101)------------------------------------------...
Hi experts,We have a very basic legacy network which works like this (please see the diagram below for simplicity).All the servers and a LB belong to the same VLAN 100. We have a SVI 100 10.0.100.254/24 configured on the switch, it is used as default...
I get response for l1physIf and the speed attribute has "inherit" , what value should be considered.unknown0UnspecifiedSpeed is unknown100M1100 MbpsSpeed is 100 Mbps1G21 GbpsSpeed is 1 Gbps10G310 GbpsSpeed is 10 Gbps25G425 GbpsSpeed is 25 Gbps40G540...
Hello team! How are you? I've been trying to find information on how connect two l3outs in a multisite scenario.He have site 1 and site 2. In site 1 we have the active FW and the site 2 has the passive fw. Until now, the dg are in the Checkpoint, so ...
Resolved! Cisco ACI Multi-Site spines back-to-back
I guess the whitepage below for the ACI multisite is not clear.https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739609.html I am trying to understand if MSO is still requ...
Hello I'm after this output - > something like "show int policy-group <name> used-by".I need to list all objects that are consumed by an Interface Policy Group, can someone help with the moquery required?Basically I need to move physical connection f...
Hi guys, We have datacenters where we have ACI fabric, nexus 9k,7k 5kI am new with ACI stuff and want to learn as we have ASA firewalls that connect to it. We donot use much with ACI fabric, normally layer 2 and in another datacenter layer3 routing. ...
Hi, I'm working on an ACI design for our new datacenters. We will have Customer tenants, and a specific tenant that will propose shared services to the customers tenants (DNS, NTP, backup, VTOM scheduling...). First I planned to use a standard tenant...
Hello, in APIC GUI AAEP entry, I can see which policy-group this AEP is attached to from "Operational" tab. I can't find such information from APIC CLI. Any suggestions?
Hello, I have recently learn that ACI and IDS systems do not work because of the ACI does not support span(VLAN). I have research a few things on the web about ACI and IDS sensors. Not much there really So looking for some help on this issue. I unde...
Hi,I've encountered a high counter on Wrong area. I don't know what the meaning of it, what its cause and do this a sign I got wrong configuration or setup , please see the show command below: ACILP01# show ip ospf traffic vrf Tenat1:VRF1_VRF OSPF Pr...
