Hello ACI Folks, I am working on a interesting case and I am here to ask for an opinion. We had a cluster of three APICs, M2s running 5.2(5e). One of the APICs got replaced for a new APIC L3, unfortunately an engineer did not notice the SW versio...
Hello ACI Folks, I am working on a interesting case and I am here to ask for an opinion. We had a cluster of three APICs, M2s running 5.2(5e). One of the APICs got replaced for a new APIC L3, unfortunately an engineer did not notice the SW versio...
Hello,I was under the impression I could utilize two Uplink ports on our Border Leaf switches, after converting them within the software then reloading them. Which is what has been done. I've created vPC with those ports, but the vPC would not show u...
ACI Contract on Specific port (443) no working unless we add default filter in the Contractattached the filter and the contract after adding Default Filter
We are running APIC-SERVER-M2 which is C220 M4, they are close to end of life and we need to refresh them, the C220 M5 will be the direct replacement but my concern is that considering C220 M5 is 4 years old so the remaining life span might be consid...
hello,we are trying to design a new Data Center, the idea to merge the SAN Switches into the ACI.the question: is that a good idea? which Model of deployment is preferd FC Native or FCoE?i have searched for new models of the leafs serie that supports...
I need some help understanding if pcTag associated with an EPG can have the value "any"? I am using the API '/api/node/class/fvAEPg' to retrieve the EPG details. Can the pcTag value returned by this API have the value "any"? And if so, what kind of ...
Hello, Can someone explain to me what are doing those 3 technologies ? Thanks
Hi Folks, we are in a process of designing and planning a multi-tenant ACI fabric. We have come up with AS number 65510 for the MP-BGP route-reflector policy. This will be for the leaf to spine MP-BGP session. We are wondering do we need to use the s...
hi,how to check specific routes using rest api call?. which could be similar to "show ip route x.x.x.x vrf all"
Hi, we are doing ACI multi-site across 2 x customer DCs and one of the use cases is vm-mobility/layer-2 extension. Requirement is not to extend the layer-3(BD-subnet), as it should only remain in the primary site. This is to always use the primary si...
Hey guys, I would love your expertise on these bellow because I'm really struggling with a weird deployment. Starting from these zoning-rules:+---------+--------+--------+----------+----------------+---------+----------+------------------------------...
Hi All,As one of our Leaf switch got disconnected from the ACI.Its showing Kernal uptime is 0FYI.SoftwareBIOS: version 07.68kickstart: version 14.2(7q) [build 14.2(7q)]system: version 14.2(7q) [build 14.2(7q)]PE: version 4.2(7q)BIOS compile time: 05/...
I was hoping someone can give me some insight into this PYATS error when trying to learn "interfaces" on a NXOS switch running in ACI mode. If I issue the command "pyats learn interface --testbed-file testbed.yml" I get this error message listed belo...
Hello Everyone! I have an issue with ACI Fabric discovery. Fabric was wiped clean and reconfigured. After logging into the APIC GUI, I was able to register the first Leaf, but then the Spine has never showed up. I can see the spine with lldp and when...
Hi All,I'm still in the process of working on a ACI Multipod design. Lots of helpful info and pointers already received so thank you.A few other areas that I'm trying to wrap my head around. 1) TEP pool sizing will be a challenge due to address space...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-22-2024 03:41 AM | ||
04-17-2024 06:22 AM | ||
04-08-2024 11:40 AM | ||
04-04-2024 03:57 AM | ||
04-04-2024 02:29 AM |