Can we clear the interface counters from APIC GUI ?

[Network_Sarovani]

Hi Experts , 

We could see high CRC errors on one of the endpoint connected interface , As we do not have cli access , Can we reset the counters from APIC ? If yes , How ?

DCX2-LAEF1# show int po6 | grep 'CRC\|drop\|desc\|Last'
Last clearing of "show interface" counters never
0 runts 0 giants 6599417 CRC 0 Stomped CRC 0 no buffer
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input buffer drop 0 input total drop
0 output buffer drops 0 output total drops

[Sergiu.Daniluk]

Hi @Network_Sarovani 

You can do the following command directly from CLI of the Leaf:

clear counters interface po6

It works the same way as in NXOS.

Stay safe,

Sergiu

[Network_Sarovani]

Thanks @Sergiu.Daniluk So we do not have option to clear the counters from APIC gui ?

[Robert Burns · Accepted solution]

Be aware of https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv38458 which references a bug when clearing CRC stomps from the CLI, not reflecting in the GUI for older 4.2 releases.  4.2(6) and later should be unaffected by this.

Interface counters can only be cleared via CLI currently.

Robert