cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
309
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco 9k tcam timers in ACI vs. NXOS

Hello -

QQ - Do the local tcam table timers in the 9396PX (or really any 9k switch), change when running in ACI mode vs NXOS mode?  And if not, does that mean that for certain HW perfomace stats, we can refer to the 9k data sheet (they appear to be written in the context of NXOS)?  

 

thanks

 

1 REPLY 1
Highlighted
Cisco Employee

The timers in standalone vs.

The timers in standalone vs. ACI mode are managed differently.

 

Standalone Mode

=============

Aging Time: Default =1800

 

In ACI mode, timers are managed by the Endpoint retention policy.

 

ACI Mode

=========

Hold Interval: Default = 300s

Bounce Entry Aging Interval: Default = 630s

Local End Point Aging Interval: Default = 900s

Remote End Point Aging Interval: Default = 300s

 

You can view details on these options from the online help.

https://[apic_ip]//help/content/index.html#fv_infoEpRetPolA_infoEpRetPol.html

 

Regards,

Robert