If you want to take advantage of vxlan, I would suggest looking into ACI AVE. The Cisco AVE is very similar to the Cisco AVS with the difference that it is running on a VM instead of the ESX kernel as the AVS does. Since the AVE runs on a VM, you don’t have to worry about the end of support for 3rd party DVS from VMWare.
ACI Fabric start learning external remote IP’s locally on the Leaf switches . Due to this reason, traffic is locally dropped on Leaf Sw03 instead of going outside the fabric. This issue basically interrupted most of the External & Internal services be...
Transforming Day 2 Ops with Cisco Data Center Network Assurance and Insights
Live webinar: Network Insider Series
Wednesday, July 15, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00) Driven by the growth of applications, deluge of data and t...
Hi All,i am going to deploy Hyperflex with Vmware for Testing Purposes.Are there CLI commands to do a factory reset of a new Hyperflex system and rebuild hyper flex again?is there any procedure for rebuild Hyperflex?
Hi,Does the "Cisco’s Massively Scalable Data Center Network Fabric" (MSDC) Architecture be managed by ACI ?I mean can the physical topology of the ACI network be a MSDC network?Cisco’s Massively Scalable Data Center Network Fabric White Paperhttps://www.c...